White Paper: Internet Access in a Process Control Environment
Industrial automation is no longer limited by the walls of a production facility. More and more automation is being handled via remote communication, whether its from the office or from the comfort of your own home. Todays PLCs give you the ability to access your control system to
handle such tasks as monitoring via a website to determine the condition of a machine or check other statistics.
Use CFD to Improve Crystallization | Chemical Processing
In this article, Kumar Dhanasekharan, Ph.D., technical specialist with the computational fluid dynamics (CFD) specialist Fluent, Inc., shows how modelling crystallizers using CFD can help improve process understanding, control crystal size distribution (CSD) and improve pharmaceutical crystallization results.
The Regional Transport of Ozone
EPA tracks emissions of six principal air pollutants - carbon monoxide, lead, nitrogen oxides, particulate matter, sulfur dioxide, and volatile organic compounds. All have decreased significantly since passage of the Clean Air Act in 1970 - except for nitrogen oxides.
Securing Batch Control Systems
Batch process control security is becoming a critical concern for the process control domain, IT technology infrastructure and the business enterprise. This paper explores several key security concerns in batch control system architectures and methods for addressing these issues.
Process Moisture Analysis using FT-NIR
Manufacturing a pure product can be critically important to the next steps in the manufacture of a powder-based product. As a result the removal of residual moisture and solvents from the crystallization, filtration and drying steps can be crucial to producing a stable product.
Process Control Network Security - Reference Architecture
This document describes best practices for the reference architecture for a process control system network and its interfaces to a corporate network. The papers objective is to give the reader an understanding of the techniques utilized to securely connect these networks.
Process Control Network Security
This document provides an understanding of intrusion detection and prevention systems, why they are necessary, how and where they fit in the control system environment, and gives example scenarios.
Preventing Segregation During Powder Drying
This 4-page case history by Jeroen van den Berg of Bolz-Summix discusses how changing process conditions within a conical screw dryer eliminated granulation and minimized product segregation.
Oxygen in cell culture/venting ozonated vessels
This white paper outlines trends and opportunities for gasket standardization in processing plants ... including the potential for more reliable sealing, cost savings, inventory reduction, easier installation and safety practices. Steps are outlined for achieving success in gasket standardization across steel, glass-lined and FRP piping.
W. L. Gore & Associates, Inc.
Managing Complex Equipment Status in a GMP Environment
Batch manufacturing systems must maintain the status of equipment, including which are available, dirty, out of service, etc. In industries that enforce Good Manufacturing Practices (GMPs), additional status types and values for process equipment must be maintained. Rules associated with the equipment status can be complex and involve the equipment class, current equipment state and time in the current
state. This paper covers the operator interface used to review the equipment status and the interlocking requirements between the recipe and batch phases based on multiple status types.
Guidance note for environmental safety instrumented systems
Safety Instrumented Systems (SIS) are designed to monitor the process and control outputs to prevent or mitigate hazardous events. The design process strives for inherent safety, which is enhanced by applying multiple independent safety layers. Learn how to prevent accidents with prevention layers and minimise the consequences with mitigation layers.
Fieldbus and remote I/O system comparison
Nine manufacturers participated in the FuRIOS study, which was conduced under the lead of an end user company that compared its use of fieldbus and remote I/O in full detail.
Aventis, Infraserv GmbH
Design Tips for Sensing Probes
This application note from Delta Controls outlines selection and installation criteria for using admittance probes to monitor the level of powders, liquids and other materials. Dielectric constants of more than 200 materials are included.
Cybersecurity: Power Industry Locks Down
The power industry is susceptible to a variety
of cyber threats, which can wreak havoc on control systems. Management, engineering and IT must commit to a comprehensive approach that encompasses threat prevention,
detection and elimination.
Clean-in-place operation for thin-cake filtration technologies
This article discusses the choice of thin-cake (2 25 mm) separation technologies and their benefits to optimizing the effectiveness of the production process. The paper continues with a
discussion of clean-in-place operations to meet current Good Manufacturing Practices (cGMP) guidelines including riboflavin test and validations.