2006

New page content.
1-20 of 24 < first | prev | | last >
  • Oxygen in cell culture/venting ozonated vessels

    This white paper outlines trends and opportunities for gasket standardization in processing plants ... including the potential for more reliable sealing, cost savings, inventory reduction, easier installation and safety practices. Steps are outlined for achieving success in gasket standardization across steel, glass-lined and FRP piping.

    W. L. Gore & Associates, Inc.
    10/18/2006
  • The effects of antifoams on ultrafiltration membranes

    This paper discusses the problem of membrane fouling by antifoams, its leading causes and describes the development of a nonfouling antifoam for processes that use ultrafiltration downstream.

    Dow Corning Corporation
    09/22/2006
  • Applying ISA-S88 to Software Migration Engineering

    Dow Chemical maintains thousands of batch control systems world-wide built on its proprietary MOD 5 computer system. Over decades, they have been meticulous to preserve and enhance these systems. Dow intends to preserve and reap the rewards of this diligence by developing reverse engineering best practices and tools to migrate this intellectual property to next-generation platforms.

    Dow Chemical
    07/12/2006
  • Process Moisture Analysis using FT-NIR

    Manufacturing a pure product can be critically important to the next steps in the manufacture of a powder-based product. As a result the removal of residual moisture and solvents from the crystallization, filtration and drying steps can be crucial to producing a stable product.

    Bruker Optics
    06/28/2006
  • Managing Complex Equipment Status in a GMP Environment

    Batch manufacturing systems must maintain the status of equipment, including which are available, dirty, out of service, etc. In industries that enforce Good Manufacturing Practices (GMPs), additional status types and values for process equipment must be maintained. Rules associated with the equipment status can be complex and involve the equipment class, current equipment state and time in the current state. This paper covers the operator interface used to review the equipment status and the interlocking requirements between the recipe and batch phases based on multiple status types.

    Honeywell
    06/13/2006
  • Guidance note for environmental safety instrumented systems

    Safety Instrumented Systems (SIS) are designed to monitor the process and control outputs to prevent or mitigate hazardous events. The design process strives for inherent safety, which is enhanced by applying multiple independent safety layers. Learn how to prevent accidents with prevention layers and minimise the consequences with mitigation layers.

    P & I Design
    05/26/2006
  • Securing Batch Control Systems

    Batch process control security is becoming a critical concern for the process control domain, IT technology infrastructure and the business enterprise. This paper explores several key security concerns in batch control system architectures and methods for addressing these issues.

    Honeywell
    05/11/2006
  • Preventing Segregation During Powder Drying

    This 4-page case history by Jeroen van den Berg of Bolz-Summix discusses how changing process conditions within a conical screw dryer eliminated granulation and minimized product segregation.

    Bolz-Summix
    05/02/2006
  • White Paper: Internet Access in a Process Control Environment

    Industrial automation is no longer limited by the walls of a production facility. More and more automation is being handled via remote communication, whether it’s from the office or from the comfort of your own home. Today’s PLCs give you the ability to access your control system to handle such tasks as monitoring via a website to determine the condition of a machine or check other statistics.

    Wago Innovative Connections
    04/24/2006
  • Clean-in-place operation for thin-cake filtration technologies

    This article discusses the choice of thin-cake (2 – 25 mm) separation technologies and their benefits to optimizing the effectiveness of the production process. The paper continues with a discussion of clean-in-place operations to meet current Good Manufacturing Practices (cGMP) guidelines including riboflavin test and validations.

    BHS-Filtration
    04/20/2006
  • Chemical Hazard Communication

    Under the provisions of the Hazard Communication Standard, employers are responsible for informing employees of the hazards and the identities of workplace chemicals to which they are exposed.

    OSHA
    03/28/2006
  • Cybersecurity: Power Industry Locks Down

    The power industry is susceptible to a variety of cyber threats, which can wreak havoc on control systems. Management, engineering and IT must commit to a comprehensive approach that encompasses threat prevention, detection and elimination.

    Power Engineering
    03/27/2006
  • Process Control Network Security

    This document provides an understanding of intrusion detection and prevention systems, why they are necessary, how and where they fit in the control system environment, and gives example scenarios.

    Invensys
    03/27/2006
  • V-Cone flow meter test results | Chemical Processing

    The American Petroleum Institute Manual of Petroleum Measurement Standards published the results of flow meter tests at the Southwest Research Institute and Utah State University.

    Southwest Research Institute
    03/21/2006
  • Use CFD to Improve Crystallization | Chemical Processing

    In this article, Kumar Dhanasekharan, Ph.D., technical specialist with the computational fluid dynamics (CFD) specialist Fluent, Inc., shows how modelling crystallizers using CFD can help improve process understanding, control crystal size distribution (CSD) and improve pharmaceutical crystallization results.

    Fluent
    03/06/2006
  • Fieldbus and remote I/O system comparison

    Nine manufacturers participated in the FuRIOS study, which was conduced under the lead of an end user company that compared its use of fieldbus and remote I/O in full detail.

    Aventis, Infraserv GmbH
    02/10/2006
1-20 of 24 < first | prev | | last >