2005

New page content.
21-40 of 41 < first | | | last >
  • Hygienic Feeder Design

    Specifying a hygienic bulk solids feeder is not a simple task. The wide variety of requirements needed for specific applications are similar in scope to explosion proof environmental requirement variations.

    Schenck
    06/06/2005
  • Systems Reliability in Material Handling

    This 23-page white paper is from the Material Handling Institute's Classic Series and discusses the reliability of automated material handling systems.

    Material Handling Institute
    05/31/2005
  • Bearing isolators 101

    A bearing isolator is a non-contact, non-wearing, permanent bearing protection device. It has a rotor and a stator, and the two are unitized, so that they don’t separate from one another while in use. Typically, the rotor turns with a rotating shaft, while the stator is pressed into a bearing housing. The two components interact to keep contamination out of the bearing enclosure and the lubricant in.

    Inpro
    05/17/2005
  • Security vulnerability assessment revealed

    Plant security is a key priority at many plants. This 10-page paper provides background what the methodology for a plant vulnerability analysis involves. It covers topics such as how to get started, available tools, and risk assessment.

    ioMosiac
    04/21/2005
  • Methods of determining safety integrity level (SIL)

    This 17-page whitepaper discusses the application of two popular methods of determining SIL requirements – risk graph methods and layer of protection analysis (LOPA) – to process industry installations.

    4-sight consulting
    04/19/2005
  • Technical handbook from Magnetrol

    This technical handbook from Magnetrol gives important conversions, chemical properties, equivalents and pipe data.

    Magnetrol
    04/04/2005
  • Fisher control valve handbook

    This 295-page PDF whitepaper is a control valve resource that has been consistently updated for 30 years. It contains vital information on control valve performance and latest technologies.

    Fisher
    04/04/2005
  • Understanding and preventing fine powder flushing

    This nine-page whitepaper discusses the sources of powder flooding, the dangers it can pose to your equipment and the steps you can take to prevent it from happening.

    Diamondback Technology
    03/01/2005
  • Understanding alarm management

    This nine-page PDF whitepaper discusses the pitfalls of alarm management and how mistakes in the past have been quite costly. It then addresses these mistakes and gives an overview of proper alarm management.

    4-sight Consulting
    02/10/2005
  • Eliminating arching hangups in hoppers

    This short two-page PDF whitepaper first discusses how an arch develops within a hopper and then disusses strategies for effectively removing them.

    Diamondback Technology
    01/31/2005
  • How to control a process with long dead time

    A process with a large dead time presents a special challenge for a controller --  any controller. This short paper explains how to get the best control of large dead time processes.

    ExperTune
    01/11/2005
  • Theory and practice of pH measurement

    This 43-page guide covers the basic mechanism of pH measurement, the structure of the sensor and its fundamental limitations, and also provides installation, maintenance and troubleshooting guidance.

    Rosemount Analytical
    01/04/2005
21-40 of 41 < first | | | last >