2005

New page content.
21-40 of 41 < first | | | last >
  • Technical handbook from Magnetrol

    This technical handbook from Magnetrol gives important conversions, chemical properties, equivalents and pipe data.

    Magnetrol
    04/04/2005
  • Security vulnerability assessment revealed

    Plant security is a key priority at many plants. This 10-page paper provides background what the methodology for a plant vulnerability analysis involves. It covers topics such as how to get started, available tools, and risk assessment.

    ioMosiac
    04/21/2005
  • Bearing isolators 101

    A bearing isolator is a non-contact, non-wearing, permanent bearing protection device. It has a rotor and a stator, and the two are unitized, so that they don’t separate from one another while in use. Typically, the rotor turns with a rotating shaft, while the stator is pressed into a bearing housing. The two components interact to keep contamination out of the bearing enclosure and the lubricant in.

    Inpro
    05/17/2005
  • Securing Process Control Network External Communications

    In the real world, sharing PCN data with external systems and accessing PCN systems from external sources is fast becoming a business necessity. This paper provides some generic guidelines for enabling secure connectivity between PCNs and external systems.

    Honeywell
    09/16/2005
  • Continuous imaging fluid particle analysis: A Primer

    This paper looks at the issues associated with fluid particle analysis, discusses some of the historical methods used, and introduces a new technology: the continuous imaging fluid particle analyzer.

    Fluid Imaging Technologies
    11/14/2005
  • Fisher control valve handbook

    This 295-page PDF whitepaper is a control valve resource that has been consistently updated for 30 years. It contains vital information on control valve performance and latest technologies.

    Fisher
    04/04/2005
  • How to control a process with long dead time

    A process with a large dead time presents a special challenge for a controller --  any controller. This short paper explains how to get the best control of large dead time processes.

    ExperTune
    01/11/2005
  • Taking Toxics Out of the Air

    This 34-page PDF white paper discusses the technology and performance-based standards implemented by the EPA during the last 10 years and how they will assist in removing harmful toxins from the air.

    Enivironmental Protection Agency
    06/28/2005
  • Understanding and preventing fine powder flushing

    This nine-page whitepaper discusses the sources of powder flooding, the dangers it can pose to your equipment and the steps you can take to prevent it from happening.

    Diamondback Technology
    03/01/2005
  • Eliminating arching hangups in hoppers

    This short two-page PDF whitepaper first discusses how an arch develops within a hopper and then disusses strategies for effectively removing them.

    Diamondback Technology
    01/31/2005
  • Design Tips for Selecting Sensing Probes

    This application note from Delta Controls outlines selection and installation criteria for using admittance probes to monitor the level of powders, liquids and other materials. Dielectric constants of more than 200 materials are included.

    Delta Controls
    07/05/2005
  • Electro-hydraulic system design: Making the right system choices

    Designers who understand and can take advantage of the differences between fluid power and traditional electromechanical power can build machines that produce higher quality output with lower lifecycle costs. This white paper suggests that care must be taken, however, in selecting and sizing the hydraulic system elements and in tuning the motion controller for optimal performance.

    Delta Computer Systems
    08/16/2005
  • Energy Efficiency - The Other Alternative Fuel

    Proven methods for industry to reduce energy consumption and environmental impact are already at hand. These cost-effective solutions promise substantial return-on-investment now and in the future, without sacrificing performance or quality. For most companies and organizations, the answers to maintaining a competitive edge in this era of rising energy costs are readily available. By applying a suite of cost-effective power and automation solutions from technology leaders like ABB, these facilities can achieve substantial energy savings today without waiting for the "alternative fuels" of the future.

    ABB
    09/27/2005
  • Methods of determining safety integrity level (SIL)

    This 17-page whitepaper discusses the application of two popular methods of determining SIL requirements – risk graph methods and layer of protection analysis (LOPA) – to process industry installations.

    4-sight consulting
    04/19/2005
  • Understanding alarm management

    This nine-page PDF whitepaper discusses the pitfalls of alarm management and how mistakes in the past have been quite costly. It then addresses these mistakes and gives an overview of proper alarm management.

    4-sight Consulting
    02/10/2005
21-40 of 41 < first | | | last >