2004

New page content.
21-40 of 51 < first | | | last >
  • Nonwoven Fabric Filtration Media

    This 6-page primer explains the various forms of nonwoven media, their special characteristics, as well as filter configurations and function. It discusses advantages and disadvantages, and application trends.

    Edward C. Gregor
    10/15/2004
  • Maximize Returns from Precious-Metal-Bearing Catalysts

    Many catalytic reactions rely on platinum, palladium and other precious metal catalysts. When the activity of the catalyst declines to the point that it must be replaced, the used catalyst can be sent to a refiner to recover precious metal. This 8-page paper discusses the variouis factors that should be considered when using a refiner.

    Sabin
    10/15/2004
  • Layered Security in Plant Control Environments

    Process control vendors are migrating plant control technologies to more open network and operating environments. This White Paper explains how layered security can be accomplished by adopting a "best practices" model, developing and implementing an access control plan, and compartmentalizing the network.

    Ensuren Corp.
    10/15/2004
  • Audit Your Materials Handling

    This 5-page document discusses how to improve the return on investment by appropriate auditing of materials-handling operations.

    10/15/2004
  • Properly Model and Control Batch Reactors

    This paper covers key aspects for modeling and design of batch reactors, including: heat-up and cool-down performance, sensitivity analysis for reactor parameters, boil-up rate predictions, thermal stability under exothermic conditions, control system design and loop tuning parameters, condenser rating, and process emissions predictions.

    10/15/2004
  • Accurate Steam Mass Measurement

    Vortex meters are ideal for measuring saturated steam flow, and now can be used to measure mass flow with integrated temperature sensor and controller software. These meters can also be integrated into a Foundation Fieldbus industrial network system.

    10/15/2004
  • Application of Fingerprints to Increase Security

    This 9-page paper summarizes the various applications and benefits of the use of fingerprints to restrict access to information and transactions. It covers access via the Internet and other networks as well as physical access.

    10/15/2004
  • Control System Security: Interacting with IT

    Operations staff and plant engineers also have a keen interest in the security of control networks. They are responsible for the reliability, availability, safety and integrity of the process. Their facilities are the ones producing products and earning revenues, so their concerns, priorities and knowledge must also be considered when determining security options.

    10/15/2004
  • Design Guidelines for Distillation Columns in Fouling Service

    This 33-page paper discusses the wide variety of factors that can cause fouling and the impact of this fouling on the performance of a distillation column. It then provides details on practical methods for mitigating fouling, including equipment design, surface treatment, and use of additives.

    10/15/2004
  • Design Tips for Admittance Probes

    This white paper from Delta Controls outlines a range of selection and installation criteria for using admittance probes to monitor the level of powders, liquids and other materials. Dielectric constants of more than 200 common industrial materials are included.

    10/15/2004
  • Push Maintenance: The New Frontier in Asset Management

    The convergence of innovative technologies using open industry standards simplifies communication between software and technology. Now you can centralize key performance diagnostics, push critical information to the workforce, and problems can be solved from anywhere.

    10/15/2004
  • Design Guidelines for Distillation Columns in Fouling Service

    This 33-page paper discusses the wide variety of factors that can cause fouling and the impact of this fouling on the performance of a distillation column. It then provides details on practical methods for mitigating fouling, including equipment design, surface treatment, and use of additives.

    10/15/2004
  • Achieve 21 CFR Part 11 Compliance

    This technical white paper discusses Yokogawa’s CENTUM CS 3000 R3 DCS (Distributed Control System) product and the extent of its compliance with Part 11 of Title 21 of the Code of Federal Regulations (21 CFR Part 11), the Electronic Records/Electronic Signatures Rule.

    10/12/2004
  • Design the Heat-Transfer-System Expansion Tank Right

    The design of the expansion tank plays an important role in the successful operation of a heat transfer system using organic fluids. It can contribute to longer fluid life and lower maintenance. This paper describes the proper sizing, piping and valving, instrumenting, and inerting of the tank.

    Solutia
    10/11/2004
  • Understand Heat-Transfer-Fluid Maximum Temperature Rating

    Manufacturers of heat transfer fluids assign a maximum temperature rating to each fluid. This rating must be considered to ensure the safe and efficient operation of the fluid. This paper explains the basis of the rating, how fluids degrade, and how the temperature profile in a heat transfer system affects fluid performance and life.

    Therminol
    10/11/2004
  • Properly Model and Control Batch Reactors

    This paper covers key aspects for modeling and design of batch reactors, including: heat-up and cool-down performance, sensitivity analysis for reactor parameters, boil-up rate predictions, thermal stability under exothermic conditions, control system design and loop tuning parameters, condenser rating, and process emissions predictions.

    10/11/2004
21-40 of 51 < first | | | last >