2004

New page content.
41-60 of 51 < first | | next | last >
  • Design the Heat-Transfer-System Expansion Tank Right

    The design of the expansion tank plays an important role in the successful operation of a heat transfer system using organic fluids. It can contribute to longer fluid life and lower maintenance. This paper describes the proper sizing, piping and valving, instrumenting, and inerting of the tank.

    Solutia
    10/11/2004
  • Design Guidelines for Distillation Columns in Fouling Service

    This 33-page paper discusses the wide variety of factors that can cause fouling and the impact of this fouling on the performance of a distillation column. It then provides details on practical methods for mitigating fouling, including equipment design, surface treatment, and use of additives.

    10/15/2004
  • Design Guidelines for Distillation Columns in Fouling Service

    This 33-page paper discusses the wide variety of factors that can cause fouling and the impact of this fouling on the performance of a distillation column. It then provides details on practical methods for mitigating fouling, including equipment design, surface treatment, and use of additives.

    10/15/2004
  • Control System Security: Interacting with IT

    Operations staff and plant engineers also have a keen interest in the security of control networks. They are responsible for the reliability, availability, safety and integrity of the process. Their facilities are the ones producing products and earning revenues, so their concerns, priorities and knowledge must also be considered when determining security options.

    10/15/2004
  • Continuous PHA Revalidation

    A process hazard analysis must be revalidated every five years. This paper discusses the merits of a new approach aimed at increasing the effectiveness of PHAs, called Continuous PHA revalidation.

    12/03/2004
  • Beyond the Resource Conservation and Recovery Act

    The EPA provides a vision of where waste and materials management is headed in 2020, covering issues like sustainable use of resources and the life-cycle approach to managing chemical risk.

    10/11/2004
  • Audit Your Materials Handling

    This 5-page document discusses how to improve the return on investment by appropriate auditing of materials-handling operations.

    10/15/2004
  • Application of Fingerprints to Increase Security

    This 9-page paper summarizes the various applications and benefits of the use of fingerprints to restrict access to information and transactions. It covers access via the Internet and other networks as well as physical access.

    10/15/2004
  • Achieve 21 CFR Part 11 Compliance

    This technical white paper discusses Yokogawa’s CENTUM CS 3000 R3 DCS (Distributed Control System) product and the extent of its compliance with Part 11 of Title 21 of the Code of Federal Regulations (21 CFR Part 11), the Electronic Records/Electronic Signatures Rule.

    10/12/2004
  • Accurate Steam Mass Measurement

    Vortex meters are ideal for measuring saturated steam flow, and now can be used to measure mass flow with integrated temperature sensor and controller software. These meters can also be integrated into a Foundation Fieldbus industrial network system.

    10/15/2004
41-60 of 51 < first | | next | last >