2004

New page content.
1-20 of 51 < first | prev | | last >
  • Accurate Steam Mass Measurement

    Vortex meters are ideal for measuring saturated steam flow, and now can be used to measure mass flow with integrated temperature sensor and controller software. These meters can also be integrated into a Foundation Fieldbus industrial network system.

    10/15/2004
  • Achieve 21 CFR Part 11 Compliance

    This technical white paper discusses Yokogawa’s CENTUM CS 3000 R3 DCS (Distributed Control System) product and the extent of its compliance with Part 11 of Title 21 of the Code of Federal Regulations (21 CFR Part 11), the Electronic Records/Electronic Signatures Rule.

    10/12/2004
  • Application of Fingerprints to Increase Security

    This 9-page paper summarizes the various applications and benefits of the use of fingerprints to restrict access to information and transactions. It covers access via the Internet and other networks as well as physical access.

    10/15/2004
  • Audit Your Materials Handling

    This 5-page document discusses how to improve the return on investment by appropriate auditing of materials-handling operations.

    10/15/2004
  • Beyond the Resource Conservation and Recovery Act

    The EPA provides a vision of where waste and materials management is headed in 2020, covering issues like sustainable use of resources and the life-cycle approach to managing chemical risk.

    10/11/2004
  • Continuous PHA Revalidation

    A process hazard analysis must be revalidated every five years. This paper discusses the merits of a new approach aimed at increasing the effectiveness of PHAs, called Continuous PHA revalidation.

    12/03/2004
  • Control System Security: Interacting with IT

    Operations staff and plant engineers also have a keen interest in the security of control networks. They are responsible for the reliability, availability, safety and integrity of the process. Their facilities are the ones producing products and earning revenues, so their concerns, priorities and knowledge must also be considered when determining security options.

    10/15/2004
  • Design Guidelines for Distillation Columns in Fouling Service

    This 33-page paper discusses the wide variety of factors that can cause fouling and the impact of this fouling on the performance of a distillation column. It then provides details on practical methods for mitigating fouling, including equipment design, surface treatment, and use of additives.

    10/15/2004
  • Design Guidelines for Distillation Columns in Fouling Service

    This 33-page paper discusses the wide variety of factors that can cause fouling and the impact of this fouling on the performance of a distillation column. It then provides details on practical methods for mitigating fouling, including equipment design, surface treatment, and use of additives.

    10/15/2004
  • Design the Heat-Transfer-System Expansion Tank Right

    The design of the expansion tank plays an important role in the successful operation of a heat transfer system using organic fluids. It can contribute to longer fluid life and lower maintenance. This paper describes the proper sizing, piping and valving, instrumenting, and inerting of the tank.

    Solutia
    10/11/2004
  • Design Tips for Admittance Probes

    This white paper from Delta Controls outlines a range of selection and installation criteria for using admittance probes to monitor the level of powders, liquids and other materials. Dielectric constants of more than 200 common industrial materials are included.

    10/15/2004
  • Facility Major Risk Survey

    This 8-page primer describes a method for identification of major acute risks in existing process facilities that can potentially affect on-site and off-site populations and for prioritization of mitigation methods.

    ioMosaic
    12/02/2004
  • How to Choose a Vacuum Dryer

    Vacuum drying can be applied in a range of processes in several industries, including chemical, pharmaceutical, food, plastics, and metal powders. This article first discusses vacuum drying benefits and limitations and dryer components and operation, then explains the differences between tumble and agitated vacuum dryers and how you can select one for your application.

    11/19/2004
1-20 of 51 < first | prev | | last >