2004

New page content.
41-60 of 51 < first | | next | last >
  • Permit-Required Confined Spaces

    This new U. S. Occupational Safety and Health Administration paper describes OHSA's confined-space satndard, and discusses how to meet it by controlling hazards, administering entry permits and assigning duties, as well as how to deal with emergencies and OSHA assistance available.

    10/11/2004
  • Design Tips for Admittance Probes

    This white paper from Delta Controls outlines a range of selection and installation criteria for using admittance probes to monitor the level of powders, liquids and other materials. Dielectric constants of more than 200 common industrial materials are included.

    10/15/2004
  • Push Maintenance: The New Frontier in Asset Management

    The convergence of innovative technologies using open industry standards simplifies communication between software and technology. Now you can centralize key performance diagnostics, push critical information to the workforce, and problems can be solved from anywhere.

    10/15/2004
  • How to Choose a Vacuum Dryer

    Vacuum drying can be applied in a range of processes in several industries, including chemical, pharmaceutical, food, plastics, and metal powders. This article first discusses vacuum drying benefits and limitations and dryer components and operation, then explains the differences between tumble and agitated vacuum dryers and how you can select one for your application.

    11/19/2004
  • Design Guidelines for Distillation Columns in Fouling Service

    This 33-page paper discusses the wide variety of factors that can cause fouling and the impact of this fouling on the performance of a distillation column. It then provides details on practical methods for mitigating fouling, including equipment design, surface treatment, and use of additives.

    10/15/2004
  • Understanding Regulated Health and Safety Standards--Part 1

    This paper provides the viewpoint of the American Conference of Governmental Industrial Hygienists (ACGIH), a private not-for-profit, non-governmental corporation open to all industrial hygienists or other occupational health and safety professionals. The authors have the opinion that there are misunderstandings about the use of regulated health and safety standards. In part one of this article, they provide some information on how regulations are formed and advice on using these values to conduct business. Employers and employees need this fundamental understanding to make informed health and safety decisions. This information is also useful for guiding public decisions about everyday toxic exposures.

    10/22/2004
41-60 of 51 < first | | next | last >