Perspectives: Compliance Advisor

Chemical Safety Board Makes PSM a Top Priority

Agency wants to modernize process safety management regulations

By Lynn Bergeson, regulatory editor

On December 1, 2014, the U.S. Chemical Safety Board (CSB) announced that its “Most Wanted Safety Improvement” is to modernize U.S. process safety management (PSM) regulations. Specifically, the CSB notes implementation of key federal and state CSB safety recommendations will result in significant improvement of PSM regulations in the United States. The CSB is an independent federal agency charged with investigating serious chemical accidents. Board members are appointed by the President and confirmed by the Senate. CSB investigations look into all aspects of chemical accidents, including physical causes such as equipment failure as well as inadequacies in regulations, industry standards and safety management systems. (The CSB has suffered internal divisions recently; see: “Turmoil Takes a Toll on Chemical Safety Board[http://goo.gl/2su0pE].") *Time for Improvement Is Now* While the CSB notes a number of improvements in PSM regulations have been made since the 1990s, for the most part regulations haven’t been substantively revised to address the passage of time or improvements in chemical management. According to the CSB, recommendations related to the Occupational Safety and Health Administration (OSHA) PSM program and U.S. Environmental Protection Agency (EPA) Risk Management Program (RMP) have been made and some even implemented, but many such recommendations haven’t been fully implemented or likely seriously considered.  By focusing on modernizing U.S. PSM regulations, the CSB is plainly identifying this issue as one of the Board’s most important recommendations-related goals.

Read more

More from this perspective...

Title

Program Targets Toxic "Hot Spots"

EPA rolls out school monitoring air initiative.

04/14/2009

Compliance: Vehicle Emissions May Prove Costly

EPA proposes to find that GHGs endanger public health.

05/11/2009

Anti-Terrorism Mandates Face Major Revision

Prospective legislation may put more emphasis on inherent safety.

06/08/2009

Safety Comes First for Nanotechnology

Online guide provides innovative path to product stewardship.

07/13/2009

Compliance Advisor: Think Small for Water Management

EPA hosts conference on decentralized wastewater treatment systems.

08/05/2009

EPA Launches Online Discussion

It’s your chance to impact National Enforcement Program priorities.

09/08/2009

Expect More Inspections

OSHA’s National Emphasis Program targets more facilities.

10/23/2009

EPA Targets Electric Utilities

The agency steps up efforts to manage coal ash damage.

11/04/2009

Prepare to Report Climate Risks

Pressure mounts on companies to increase required disclosures.

12/07/2009

EPA Takes Unprecedented Action

Agency targets several types of "Risk List" chemicals.

01/12/2010

Disclosure Protection May Narrow

EPA targets confidential business information claims.

02/09/2010

OSHA Aims to Harmonize Standards

Aligning chemicals labeling with global rules involves major efforts.

03/10/2010

Chemical Pollutants in Water Emerge

High profile contaminants make for murky regulatory waters.

04/12/2010

EPA Seeks to Lift Stay

Hydrogen sulfide reporting requirements get scrutiny.

05/06/2010

Regulation: Tiny Particles Get Big Attention

Federal, state, international regulations target nanoscale materials.

06/10/2010

Transportation Revisions Are Coming Down the Pipeline

Possible changes to rules for transporting combustible materials may eliminate confusion.

07/06/2010

Workplace Falls Get Fresh Attention

Regulator proposes revised rules to prevent injury.

08/02/2010

Toxicity Testing Moves Ahead

The Tox21 Partnership aims for far faster and less expensive screening.

09/01/2010

New Inventory Update Rule Reporting Heads Our Way

Proposed rule will significantly impact reporting functions.

10/19/2010

CPSC Moves Ahead on Harmful Products Database

Online resource will allow consumers to report issues and manufacturers to respond.

11/11/2010