Remote Mountable Thermal Mass Flow Meter Is Designed for Hazardous Areas and Hard-to-Reach Locations

ST75.jpg

The ST75 Flow Meter from Fluid Components International (FCI) is now available in a remote mountable configuration for applications in hazardous areas or hard-to-reach locations. The ST75 Flow Meter is designed for line sizes ranging from 0.25 to 2.0 inches (6 to 51mm). The ST75 provides three outputs: the mass flow rate, the totalized flow and the media temperature. It is well suited for applications in a range of industries, including chemical, electric power, food/beverage, advanced materials, pharmaceuticals, semiconductor and more.

The ST75 Flow Meter features accuracy to ±2% of reading with ±0.5% repeatability and includes media temperature compensation to ensure performance in rugged environments. Its precision flow element has a no-moving-parts design that employs platinum RTD sensors embedded in equal mass thermowells with microprocessor electronics calibrated to laboratory standards for a range of gases, including natural gas, methane, nitrogen CO2, argon, all inert gases, compressed air and more.

The ST75 Flow Meter operates over a wide flow range, from 0.01 to 559 SCFM (0.01 to 950 NCMH), depending on line size, which makes it well suited for low-flow and high-flow applications. For variable process conditions, the ST75 is factory preset to a turndown range of 10:1 to 100:1.

Remote mount flow meters are designed for equipment crowded plants or hazardous factory areas where explosive, flammable or toxic gases may be present near the transmitter’s electronics. The ST75’s remote mount transmitter, which includes a full digital display, can be mounted up to 50 feet (15 meters) away from its thermal mass flow sensor in the process piping and connected via two 0.50-inch FNPT cables.

The ST75 Flow Meter’s standard outputs are fully scaleable 4-20mA and 0-10V. They are user assignable to flow rate and/or temperature and a 0-1kHz pulse output of total flow. The instrument can be ordered for input power with either 18 to 36 Vdc or 85 to 265 Vac, with or without a built-in LCD digital display. 

The ST75’s thermal dispersion technology provides direct-flow measurement for higher performance at a lower cost by eliminating the need for temperature sensors, flow computers or other devices that are required with orifice plates, Venturis, Vortex shedding and other meters. Its no-moving-parts design ensures improved service life. There are no orifices or inlets to clog or foul, which reduces scheduled maintenance and unplanned shut-downs.

The ST75’s rugged sensing element features all welded 316 stainless steel construction with Hastelloy-C tips. It is enclosed in an all-metal, dust- and water-resistant NEMA Type 4X (IP66) rated package that is designed for hazardous area installations. Approvals include: Class 1, Div. I Groups B, C, D. Div. II Group A, B, C; ATEX/IECEX Zone I, II 2 G Ex d IIC T6....T3; II 2 D Ex td A21, IP67 T90°....T300° (pending); FM/CSA/CRN and CE Marked.

Company Information