Endress+Hauser Applicator Tool Aids Instrumentation Selection

Source: ChemicalProcessing.com

Apr 27, 2010

Endress+Hauser announces the availability of its Applicator design tool at www.us.endress.com/applicator. The Applicator tool is said to help instrument and control engineers select the appropriate flow instrumentation for various process conditions and for specific wastewater, potable water and cement applications.

To use the tool, users follow the drop-down menus to provide information about the application, flow rates, media and other factors. For example, to determine the proper instrumentation for a Primary Clarifier in a wastewater application, the user clicks on Wastewater, selects Primary Clarifier on the process flow diagram, and clicks the icon for the point of measurement. The Applicator Tool then displays the various appropriate flowmeters. The user can enter data on flow, pressure, temperature, density, viscosity, vapor pressure and other parameters — and the Applicator Tool will size the flowmeter accordingly.
 
Other tools in Applicator allow a flowmeter to be selected according to the process media, connection standard required (AWWA, EN/DIN, ANSI, etc), fluid properties and gas mixtures. The Diaphragm Seal Sizing tool allows users to size and select the correct seal according to the sensor, span, membrane material, fill fluid, temperature and pressure. A Gamma Sizing Tool helps size a flowmeter for use in radiometric measurements for level, level limit and density applications.
 
To try the Applicator Tool, visit: www.us.endress.com/applicator

Join the discussion

We welcome your thoughtful comments. Please comply with our Community rules.
All comments will display your user name.

Want to participate in the discussion?

Register for free

Log in for complete access.

Comments

No one has commented on this page yet.

RSS feed for comments on this page | RSS feed for all comments