I need to install a dip tube on a DMAPA line into a reactor. The flow rate is currently between 30 and 50 gal/min. The dip tube will need to be about 12 to 15 ft long so that it remains under the lowest level in the reactor. How do I determine the diameter of the dip tube?
Have an insight or suggestion?
Login or register to post a comment.
-
Re: How do I determine the diameter of the dip tube?
3 May 2011 at 1:29pmThe submerged dip tube inside diameter should be no greater than 1.5-inches for a flow rate between 30 and 50 gal/min.
Login or register to post a comment.
