Is there any mathematical relationship between fouling thickness on the cooling water side and steam turbine condenser vacuum pressure? Actually what I'm wondering is how much fouling thickness causes how much condenser vacuum pressure. For example, assume that the fouling thickness is 0.35 mm of silicate deposit on the cooling water side, what happen the condenser pressure?
Have an insight or suggestion?
Login or register to post a comment.
Jim Grant Forum Moderator 120 Posts
Re: How much fouling thickness causes how much condenser vacuum pressure?15 February 2012 at 1:29pmI am not familiar with steam turbine condensers; however a silicate deposit on the tubes will have a significant effect on the heat transfer in this case. The cooling water and condensing steam heat transfer coefficients are quite large and any additional resistance, like scale, will reduce the effectiveness of the exchanger. This is also likely to result in higher pressure drop on the condensing side, increasing the condenser pressure.