Print page

Print page

Can SS316 material be used for amine and hydrogen sulfide service?

Q: Can SS316 material be used for amine and hydrogen sulfide service?

A:

This question is too general to give much guidance. Depending on the specific amine, the concentrations of amine and hydrogen sulfide, and the temperature, 316L stainless steel could very well be acceptable. These types of chemicals are frequently handled in the petroleum industry so references related to petroleum refining and petrochemical operations would be a good place to start for more detailed information.

Here are more of the latest questions on: Corrosion

Is 304 stainless steel pipe suitable for handling nitric acid?
Is 304 stainless steel pipe suitable for handling nitric acid (10% to 30% concentration) for a continuous duty application?

Which is a better MOC for carbon black plants?
Which is a better MOC for carbon black plants? We crack heavy oils (with sulfur content) at 800 degrees C to produce carbon black. Is 304 better or 316 better to avoid acid corrosion in our pipelines?

Is it better to use a Hastelloy C alloy or 316L stainless steel?
We need to install a level switch probe in 98% sulfuric acid. Based on corrosion resistance, would it be better to use a Hastelloy C alloy or should we use 316L stainless steel? The storage tank temperature is 70 to 90 degrees F and there is no contamination of the acid.

Do austenitic stainless steels have good resistance to carbonic acid attack?
We have a fin-tube style heat exchanger in which we mix natural gas and liquid water, and use an exhaust gas stream to vaporize the water and preheat the fuel mixture. We have a new water recovery process in which we condense the water out of a carbon dioxide rich exhaust stream and feed this into the heat exchanger. It has been observed that the recovered water is slightly acidic at a pH 4.5, and it has been attribute to the presence of dissolved carbonic acid in the water. The tubes of the heat exchanger are 304H Stainless Steel. Is corrosion something we should be concerned about for the long term operation of this unit?

Is 904L stainless steel suitable for a fluid with 80% hydrogen sulfide?
Is 904L stainless steel suitable for a fluid with 80% hydrogen sulfide? What is the best pipe material for fluids that contain 80% hydrogen sulfide?

Back to Ask the Experts