961-980 of 1131 < first | | | last >
  • Innovations in batching, dosing and weighing

    Challenges brought on by new regulations and technical problems for batching, dosing and weighing have pushed users to find some innovative and surprising solutions beyond our own industry.

  • The Ch in ChE stands for “Changing”

    Chemical engineers know all about the laws of supply and demand. After all, the chemical industry, which historically has employed the bulk of chemical engineers, is cyclical.

    Mike Spear, editor at large
  • Fieldbus wars continue

    As wireless Ethernet continues its aggressive growth, end users have to wonder, “Will it replace fieldbuses?” It is clear that a battle is shaping up.

    Rich Merritt, senior technical editor
  • Energy savings are often disguised as problems

    Carefully managing compressed air can save money. Compressed air is often overlooked in energy studies because many people do not fully understand compressed air equipment, their own system, or what it costs to produce compressed air power.

    Scott Van Ormer and Don Van Ormer, senior application engineers, Air Power USA
  • How to select control valves, Part 1

    When it comes to selecting and sizing control valves, the non-commercial chart in this article not only helps you pick the right one for the job, but also serves as a reference tool you can download.

    Béla Lipták, PE, CONTROL Columnist
  • Cutting the wires of communications

    Users want wireless, vendors want to sell wireless, so what’s the problem? This article tackles one of the most discussed topics: the use of wireless communications in process automation.

    Walt Boyes, Editor in Chief
  • Try before you buy

    There is another side to toll processing. It involves the companies that arguably have the best possible know-how and hardware — for the simple reason that they are the equipment manufacturers themselves, offering toll processing services that utilize their own products.

    Mike Spear, editor at large
  • Can U.S. chemical makers still compete?

    A steady stream of statistics in recent years has pointed to deteriorating competitiveness in the U.S. chemical industry. Domestic producers face global challenges but see opportunities.

    Bill Gerards, contributing editor
  • Kayo cavitation

    Checking pump performance curves is one of the first steps in troubleshooting a centrifugal pump problem or seeing if a pump can handle new service conditions. Learn to look for more than just insufficient NPSHA, the common culprit, when investigating cavitation.

    Andrew Sloley, contributing editor
  • Control your maintenance

    Automation systems have now reached such a high degree of reliability that many personnel at plants now take them for granted. Learn to use digital communication with your asset management tools to achieve predictive maintenance and substantial savings.

    Ian Verhappen, MTL Instruments Group
  • Pilot plants: destined for development

    Pilot plants are on the verge of an unprecedented evolution. Read about the 10 factors that'll impact the design, construction and operation of these next-generation units.

    Richard Palluzi, ExxonMobil Research and Engineering Co.
  • Small sensors promise big impact

    Because many environmental applications of nanotechnology will almost certainly revolutionize the science, law, and regulation of water pollution, readers are urged to keep abreast of this fast-changing area.

    Lynn Bergeson, regulatory editor
  • Plants smarten up

    Smart field devices can be a smart investment to better manage assets and thus boost competitiveness. These devices are increasingly being relied for analysis as well as data collection.

    C. Kenna Amos, contributing editor
  • Level transmitter — art not science

    There is much more to setting up a transmitter than a mere equation. Design and control errors can certainly compromise performance. Follow these simple tricks to get it right.

    Dirk Willard
  • Outsourcing moves up the maintenance ladder

    Outsourcing of non-core operations within a company, large or small, is now a well established corporate strategy. By entrusting services such as IT support, accounting, human resources and other “back office” activities to specialist firms prepared to do the job at an acceptable price, chemical companies can concentrate on their main business — where they are the specialists. That's the theory, at least.

    Mike Spear, editor at large
  • BP tackles Texas City failings

    British Petroleum's tragic March 2005 explosion has been well-documented through the press. Read here to find out how that tragedy spurred the development of a new program addressing management issues at BP.

    Foster Finley and Karl Roberts, AlixPartners
961-980 of 1131 < first | | | last >