Articles

81-100 of 133 < first | | | last >
  • A New Look for New Products

    Chemical Processing unveils its new look for new products through a resource center that covers hundreds of chemical industry must-haves.

    08/25/2008
  • Equipment & Services: March

    Chemical Processing's Equipment & Services feature provides a variety of production equipment, supplier services and parts.

    03/11/2008
  • Equipment & Services: November

    Chemical Processing's Equipment & Services feature provides a variety of production equipment, supplier services and parts.

    10/30/2007
  • Control valve diagnostics

    Health monitoring leaves fewer reasons to live with stiction, wrong-sizing and excessive wear.

    Sheila Kennedy
    10/19/2007
  • Disposable equipment earns lasting role

    Improvements in materials and processing know-how have led to a steady increase in the use of single-use or disposable equipment.

    Seán Ottewell, contributing editor
    10/04/2007
  • Equipment & Services: August

    Chemical Processing's Equipment & Services feature provides a variety of production equipment, supplier services and parts.

    08/22/2007
  • New seals get their turn

    As pressure rises on plants to improve productivity and equipment reliability levels, seals and gaskets are being called upon to provide even better performance. Their challenge no longer is simply to prevent leaks but also to play an important role in the life-cycle management of the plant.

    Mike Spear, editor at large
    07/24/2007
  • Equipment & Services: July

    Chemical Processing's Equipment & Services feature provides a variety of production equipment, supplier services and parts.

    07/24/2007
  • Equipment & Services: May

    Chemical Processing's Equipment & Services feature provides a variety of production equipment, supplier services and parts.

    05/08/2007
  • Control valves for slurry service

    In this installment of Ask The Experts, noted process control authority and CONTROL Columnist Béla Lipták and his cadre of automation experts answer a reader’s question regarding control valves for slurry services.

    05/01/2007
  • Final control

    What’s the latest on control valves? Here's a look at the current marketplace for the final element that all control stuff is aimed at—the control valve that produces the end result.

    Walt Boyes, Editor in Chief
    04/17/2007
  • Choose the right fluid for your pressure test

    Compressed gas often makes the most sense for checking a process, according to Senior Editor Dirk Willard, in this month's Field Notes column.

    Dirk Willard, senior editor
    04/12/2007
  • Combat contamination

    Consider the impact of slope, fittings and valves. Plants can lose sizable amounts of money each year because of contamination caused in process lines. Owners and contractors alike can take steps in the design and construction phase to enhance the drainability and cleanability of a system.

    Michael Bridge, Swagelok Company
    04/04/2007
  • Get full value from partial stroking

    There are two main drivers for partial stroking of valves in safety systems: the desire to extend manual test intervals to as long as possible; and to reduce the amount of redundant hardware required for higher safety integrity levels. Like most things in life, it all boils down to one thing: trying to save money.

    Paul Gruhn, ICS Triplex
    03/20/2007
81-100 of 133 < first | | | last >