Articles

701-720 of 909 < first | | | last >
  • Equipment & Services: March

    Chemical Processing's Equipment & Services feature provides a variety of production equipment, supplier services and parts.

    03/11/2008
  • Distillation is bubbling up

    High capacity utilization is prompting significant efforts to optimize column performance

    Seán Ottewell
    03/10/2008
  • Keeping on the Level

    Measuring the level of solids can be tricky. Ultrasonic and laser measurement may be the answer.

    02/25/2008
  • Get the lead out

    EPA rethinks air quality standards, seeks comments.

    Lynn Bergeson
    02/05/2008
  • Product stewardship grows globally

    Product stewardship is more essential today than ever before. Globally, stewardship initiatives, whether mandatory or voluntary, are emerging with regularity, and their significance should neither be ignored nor underestimated. Here’s why.

    Lynn Bergeson
    01/07/2008
  • Build reliability in during design

    Instrumentation that promises to improve reliability may not always be what they seem. You have to consider whether a site can properly maintain sophisticated instruments.

    Dirk Willard
    12/19/2007
  • Service Plant Soon?

    EAM is different from industry to industry. Just what is enterprise asset management?

    12/19/2007
  • The Invisible Threat

    Many users don’t trust an industrial wireless network solution. Some concerns are real. Most are ethereal. It’s important to know the differences.

    11/16/2007
  • Pursue the perfect plant

    Look into creating the “perfect plant” by integrating product and operational management into your environment. This provides the ability to respond faster and minimize impact to the business and bottom line, driving increased yields, asset utilization and order fulfillment.

    John Harrison, SAP Canada
    11/14/2007
  • Carefully check vendor references

    Determine the differences between a cited installation and yours, Andrew Sloley, contributing editor, says in this month's Plant InSites column.

    Andrew Sloley, contributing editor
    10/30/2007
  • Go beyond condition monitoring

    Despite condition monitoring, unplanned outages continue to be an issue, significantly impacting financial performance through lost production and extra repair costs.

    Neil Cooper, Invensys Process Systems
    10/18/2007
  • Improve control loop performance

    Specification of control valves doesn’t adequately emphasize the very basic requirement that valve position respond in a timely manner or even at all — leading to process variability.

    Gregory K. McMillan, Emerson Process Management
    10/18/2007
  • Blind Transmitters: A return to the basics

    Analog transmitters easily send process measurements from different areas in a plant to a central PLC where process control decisions can be made based on transmitter feedback. Analog transmitters are great cost-saving alternatives to single-point controllers. In situations where multiple sensing locations are required, single point controllers’ costs can add up quickly.

    10/16/2007
  • Become a cyber-security pacesetter

    Today, most plants with control systems must contend with many pressures both to allow access to data and to secure those data.

    Rick Kaun, Matrikon, Inc.
    10/04/2007
  • Do some heavy thinking about light loads

    Cutting steam demand can get you into hot water, advises Contributing Editor Andrew W. Sloley, contributing editor, in this month's Plant InSites column.

    Andrew W. Sloley, contributing editor
    10/01/2007
  • Equipment & Services: October

    Chemical Processing's Equipment & Services feature provides a variety of production equipment, supplier services and parts.

    10/01/2007
701-720 of 909 < first | | | last >