Valves and actuators designed for handling radioactive waste must meet strict government requirements. This sometimes requires unconventional solutions. Such was the case at the Hanford Waste Treatment Project (WTP), Hanford, Wash.
When it comes to selecting and sizing control valves and positioners, this article not only helps you pick the right one for the right job, but also includes a valuable valve selection chart you can download!
The more energy prices rise, the more heat integration saves. However, heat integration steps can present complex control problems. Slip-ups in putting control systems in place can make operations nearly impossible. That certainly was the case at one unit using heat recovery.
Author: Andrew Sloley, contributing editor and Carolyn K. Hawley, VECO USA
As the pharmaceutical industry has matured, concerns about the safe handling of drug compounds during the manufacturing process have increased. To meet exposure limits and protect batches from any kind of contamination, the industrys need for improved containment has increased.
Pneumatic conveying has long been a popular choice for moving bulk materials. However, the technology hasn't been standing still, and this can influence the choice between several types of pneumatic systems.
Improper startup can result in excessive temperature and radial loading, both of which can lead to lower pump reliability from problems such as seal and bearing failure. Consultant Ross Mackay describes the three steps that should be followed during pump startup.
That rumbling/rattling noise you hear from your pump is the symptom for any number of potential problems. The first step is identifying the problem. This article will help you determine what exactly is wrong with your pump.
Install a flow meter in the recycle, cascade the flow set point with a pressure control loop. With proper tuning, the valve characteristics are lost in the flow control loop, which should be tuned fast with PI.