Articles

61-80 of 104 < first | | | last >
  • It Takes Two . . .

    Here’s How Three Users Learned the Steps to Prioritizing Process Data to Secure Useful Measures to Improve their Operations

    Jim Montague
    09/29/2008
  • Keep operations safe

    A four-phase risk reduction strategy can play a crucial role

    Angela E. Summers and William H. Hearn, SIS-TECH Solutions
    07/16/2008
  • Improve your job security

    Professional development courses can give you an edge

    Cecil L. Smith, Cecil L. Smith, Inc.
    06/01/2008
  • Build reliability in during design

    Instrumentation that promises to improve reliability may not always be what they seem. You have to consider whether a site can properly maintain sophisticated instruments.

    Dirk Willard
    12/19/2007
  • Improve control loop performance

    Specification of control valves doesn’t adequately emphasize the very basic requirement that valve position respond in a timely manner or even at all — leading to process variability.

    Gregory K. McMillan, Emerson Process Management
    10/18/2007
  • Monthly Preview: December 2007

    Here's a look at what will soon be featured on ChemicalProcessing.com. Be sure to check back for the latest articles, news and columns before you see it in print.

    10/02/2007
  • Diagnostics dig deeper

    Today’s plants come ready equipped with their own team of doctors in the shape of the many diagnostic and monitoring systems incorporated into instrumentation and other process equipment. And, like any good doctor, today’s plant diagnostics can look beyond the symptoms of poorly performing instruments and provide insights into the health of the process itself.

    Mike Spear, editor at large
    08/20/2007
  • Biomass fuel production gets sweeter

    Improved instrumentation and control strategies allow biofuel producers to reap the benefits of new processing techniques and advanced control strategies.

    David W. Spitzer, CONTROL Contributor
    07/01/2007
  • Achieve continuous safety improvement

    Enhancing safety performance requires diligence and unrelenting effort. The Independent Safety Review Panel’s recently released report on the safety culture and practices at BP’s U.S. refineries where a March 2005 explosion occurred in Texas City, Texas indicates similar failings are likely elsewhere in the industry. Learn what can be done to enhance continuous safety improvement.

    Angela Summers, SIS-TECH Solutions
    04/12/2007
  • Don’t shackle yourself to the wrong platform

    Today, process data are readily available at many levels, from instrumentation to higher-level data historians and OPC servers. Choosing the right platform can be key to successfully implementing robust and maintainable process calculations at your company.

    Dane Overfield, Exele Information Systems
    03/14/2007
  • Keep measurements on the level

    This article looks at six technologies — mechanical floats and displacers, differential pressure, capacitance, ultrasonic, radar, and guided wave radar — that are used most often for automated control, and provides practical guidance for choosing among them.

    Jerry Boisvert, Siemens Energy & Automation
    11/01/2006
  • Today’s China Syndrome

    The country boasts not just booming exports but a strong desire for the best technology.

    Mike Spear, editor at large
    09/27/2005
  • Process engineering: Dryer provides a concrete lesson in control

    Removing water or moisture from a liquid stream is a critical operation in many processes. Liquid stream dryers commonly contain either molecular sieves or adsorbents; during the last 20 years, the use of molecular sieves has become much more common.

    Andrew Sloley, contributing editor, and Richard Readshaw, senior staff process engineer for VECO USA Inc.
    05/03/2005
  • Process engineering: Doing your level best

    Plant engineers who find it is difficult to get good level measurements have plenty of company. A recent poll shows that it is considered to be one of the two most vexing problems by process automation professionals.

    04/08/2005
  • Chemical research gets a new look

    Editor at large Nick Basta looks at what the chemical industry can do to re-invigorate its technological research. He says technology pioneered in the pharmaceutical industry promises broad benefits.

    03/11/2005
61-80 of 104 < first | | | last >