Production managers, quality control managers and maintenance engineers alike have encountered weigh cells that never worked properly. Why? Why have so many switched from a supposedly high accuracy load cell solution to old fashioned level probes or sight glasses? This article touches on the worst culprits for problems and how to avoid them.
Author: Ryan Titmas, product manager, Sartorius North America
Handling slurries (a mix of solids and liquids), should be based on experience and experiments, not theory. Much of the knowledge obtained from pneumatic conveyors and fluidization systems can be used in understanding slurries.
Author: Thomas R. Blackwood, Healthsite Associates
Properly accounting for how bulk solids actually will flow in a vessel or overall process can be crucial for successful operations. Learning some simple parameters can often provide a good sense of flowability.
Author: Don McGlinchey, Glasgow Caledonian University
Fine powders often need air injection to increase flow rates to an acceptable level. With entrained or injected air, powders flow like water, but when deaerated, the extremely low flow rate may be confused with a hang-up or arching condition.
As the pharmaceutical industry has matured, concerns about the safe handling of drug compounds during the manufacturing process have increased. To meet exposure limits and protect batches from any kind of contamination, the industrys need for improved containment has increased.
Pneumatic conveying has long been a popular choice for moving bulk materials. However, the technology hasn't been standing still, and this can influence the choice between several types of pneumatic systems.