on 'Powder & Solids'

61-80 of 146 < first | | | last >
  • 2008 Powder Show Round Up

    From the 2008 Powder Show: Mark Rosenzweig and Ken Schnepf bring you video interviews from Anhydro, Arizona Instrument, Gardner Denver, K-Tron and Readco Kurimoto

  • Powder Show Preview 2008

    The ChemProcess portion of the Process Technology for Industry International Show (PTXi) will be held from Monday through Wednesday, May 5-8, at the Donald E. Stephens Convention Center, 5555 N. River Road, Rosemont, Ill.
  • Portable conveyor speeds paint production

    Unit ensures a consistent flow of soft acrylic powder without lumps or sticking, improving the production of thermoplastic paint.

    Michel Podevyn, Spiroflow Systems, Inc.
  • Disposable equipment earns lasting role

    Improvements in materials and processing know-how have led to a steady increase in the use of single-use or disposable equipment.

    Seán Ottewell, contributing editor
  • Get the right cartridge or bag filter

    An inaccurately sized or improperly specified filter can undermine an entire high-performance liquid filtration system. There are a dozen key parameters to assess to determine the proper specification.

    Tim Mills, Kaydon Custom Filtration Corp.
  • Avoid blending blunders

    Selecting the correct device is crucial to successfully handling solids. It must deal with discrete pieces that have physical size, electrical properties, frictional differences and surface characteristics that can change with the environment.

    Tom Blackwood, Healthsite Associates
  • Get your proper bearings

    Don’t head off in the wrong direction when replacing motors. The type of service and the orientation of the motor determine which bearings it should have. Using the wrong bearings can lead to significant problems.

    Daniel R. Snyder, SKF
  • Properly protect centrifugal pumps

    Consider various factors when selecting how to guard against low flow, Andrew Sloley says in this month's Plant Insites column.

    Andrew Sloley, contributing editor
  • Two bulk conveyors prove better than one

    Engineers at EaglePicher Corp. in Quapak, Okla., faced some unique problems in manufacturing high-purity isotopic chemicals and wound up addressing them via a unique solution.

    David Boger, Flexicon Corp.
  • Squeeze More from Your Motors

    By integrating smart motor control centers that will monitor energy consumption a plant can remove wasteful energy expenditure, prevent unplanned downtime, and improve overall operational efficiency. Recent tax code amendments make these improvements inviting.

    Moin Shaikh, Siemens
61-80 of 146 < first | | | last >