Articles

401-420 of 514 < first | | | last >
  • Process safety is a good way to avoid bad consequences

    Process safety is an essential component of risk avoidance. The Occupational Safety and Health Administration (OSHA) has long recognized the critically important role for process safety awareness.

    Lynn Bergeson, regulatory editor
    06/06/2007
  • Uncertain safety

    Users seeking appropriate process safety systems aren’t getting enough help from unspecific standards and ideal-world certifications. Here’s how to gain useful safety capabilities in a buyer-beware world.

    06/01/2007
  • Wireless finds its calling

    For maintenance and condition-monitoring, wireless technology offers much more than just reducing or eliminating costs. However, wireless also requires an integrated infrastructure approach rather than independent, proprietary point solutions.

    05/27/2007
  • Strike the Right Balance

    Make the walk-through your first line of defense, advises Dirk Willard in this month's Field Notes column.

    Dirk Willard, senior editor
    04/30/2007
  • Achieve continuous safety improvement

    Enhancing safety performance requires diligence and unrelenting effort. The Independent Safety Review Panel’s recently released report on the safety culture and practices at BP’s U.S. refineries where a March 2005 explosion occurred in Texas City, Texas indicates similar failings are likely elsewhere in the industry. Learn what can be done to enhance continuous safety improvement.

    Angela Summers, SIS-TECH Solutions
    04/12/2007
  • Combat contamination

    Consider the impact of slope, fittings and valves. Plants can lose sizable amounts of money each year because of contamination caused in process lines. Owners and contractors alike can take steps in the design and construction phase to enhance the drainability and cleanability of a system.

    Michael Bridge, Swagelok Company
    04/04/2007
  • Get full value from partial stroking

    There are two main drivers for partial stroking of valves in safety systems: the desire to extend manual test intervals to as long as possible; and to reduce the amount of redundant hardware required for higher safety integrity levels. Like most things in life, it all boils down to one thing: trying to save money.

    Paul Gruhn, ICS Triplex
    03/20/2007
  • Tips and traps

    Following some partial stroke testing tips can make the process easier. Read on for more tips.

    Paul Gruhn, ICS Triplex
    03/20/2007
  • The evolution of plant automation

    Understanding the purpose of control and safety systems helps users ensure each is appropriately optimized. The duties of the SIS are to protect the people, environment and assets against unsafe conditions.

    Angela Summers, PhD, PE, founder of SIS-TECH Solutions
    03/03/2007
  • Remember the basics of maintenance

    Despite the “buzz” about asset management systems don’t forget the “oilers”, advises Mike Spear, in this month's End Point column.

    Mike Spear, editor at large
    03/01/2007
  • Plants get help in boosting reliability

    More and more companies are placing greater emphasis on maintenance and seeking help from vendors to boost the effectiveness of their efforts, as some recent major investment decisions demonstrate. Many automation companies now are benefiting by building up asset management services alongside process control capabilities.

    Mike Spear, editor at large
    02/26/2007
  • Debunk plant myths about diagnostics

    Your current control system can probably do more than you think. Everybody can agree that diagnostics are a good thing — they can identify problems early, and keep the plant running at peak performance. Learn how your existing control systems and analog instruments can deliver diagnostic capabilities, at a fraction of the cost of system or instrument replacements.

    George Buckbee, ExperTune, Inc.
    02/08/2007
  • Making the most of diagnostics

    Make the most of your diagnostics with this helpul summary from George Buckbee of ExperTune, Inc.

    George Buckbee, ExperTune, Inc.
    02/08/2007
  • The chemical industry needs fresh eyes

    Team looking at BP’s safety failings benefited from its diverse membership. Editor Mark Rosenzweig interviews panel member Dennis Hendershot for an insider's perspective.

    Mark Rosenzweig, editor in chief
    01/30/2007
  • Data validation: Jewel in the fieldbus crown?

    Many users and most suppliers to the industry see process availability as the big payout benefit of Foundation Fieldbus (FF) diagnostics — a good portion of it realized through data validation.

    John Rezabek, Contributing Editor
    11/09/2006
  • Sasol plant benefits from reliability improvements

    Sasol Solvents reduced operating costs by more than $2 million dollars at it’s plants in Sasolburg, South Africa. The efforts earned the facility the 2005 HART Plant of the Year Award.

    Dirk Willard, senior editor
    09/14/2006
  • Process analysis gains greater online role

    Faster. Smaller. Smarter. Modular. All express the future of process analytics. And un-stoppable describes the ongoing migration of process analytical instruments to continuous, online, field-mounted use at chemical plants.

    C. Kenna Amos, contributing editor
    09/11/2006
  • Twisting the dragon's tail

    Complacency is a problem when violating safety rules has no repercussions.

    Dirk Willard, senior editor
    08/18/2006
401-420 of 514 < first | | | last >