Articles

41-60 of 64 < first | | | last >
  • Get the right cartridge or bag filter

    An inaccurately sized or improperly specified filter can undermine an entire high-performance liquid filtration system. There are a dozen key parameters to assess to determine the proper specification.

    Tim Mills, Kaydon Custom Filtration Corp.
    09/04/2007
  • Avoid blending blunders

    Selecting the correct device is crucial to successfully handling solids. It must deal with discrete pieces that have physical size, electrical properties, frictional differences and surface characteristics that can change with the environment.

    Tom Blackwood, Healthsite Associates
    09/04/2007
  • Innovations in batching, dosing and weighing

    Challenges brought on by new regulations and technical problems for batching, dosing and weighing have pushed users to find some innovative and surprising solutions beyond our own industry.

    09/05/2006
  • Get a handle on solids’ flow

    Properly accounting for how bulk solids actually will flow in a vessel or overall process can be crucial for successful operations. Learning some simple parameters can often provide a good sense of flowability.

    Don McGlinchey, Glasgow Caledonian University
    05/22/2006
  • Don’t let phase changes faze you

    Phase changes in the downstream processing or handling of solids cause many process problems that have inexpensive solutions.

    Tom Blackwood, Healthsite Associates LLC
    10/04/2005
  • Build up agglomerate quality

    Several easy-to-use indices related to material flow properties can help to predict and improve an agglomeration process and product quality.

    Kristin O’Quest and Lee Dudley, Diamondback Technology, Inc.
    08/31/2005
  • How to reduce caking problems

    This web-exclusive article from Diamondback Technology identifies the most common caking mechanisms and how to solve the problem through reduction.

    07/05/2005
  • Process engineering: Pneumatic conveying moves ahead

    Pneumatic conveying has long been a popular choice for moving bulk materials. However, the technology hasn't been standing still, and this can influence the choice between several types of pneumatic systems.

    Nick Basta
    04/04/2005
  • Understanding ratholes

    Diamondback Technology supplies ChemicalProcessing.com with this exclusive piece on rathole formation in plant hoppers.

    Diamondback Technology
    04/01/2005
  • Properly introduce solids into a flowing gas stream

    Particulate solids are often required to be introduced into a flowing gas stream. If not done correctly, introduction of solids into the gas stream can lead to impingement of solids on the pipe, resulting in erosion of the pipe in the area of the solids introduction.

    01/31/2005
  • Take out torque

    A reader's ribbon blendor is experiencing torquing problems. Read tips about how to avoid torque problems in a ribbon blender.

    10/02/2004
  • The future is in plastics

    Single-use equipment is finding a place in the biopharmaceutical industry. One company has even designed a new bioprocessing facility around the disposable equipment.

    Diane Dierking
    09/16/2004
41-60 of 64 < first | | | last >