Articles

41-60 of 79 < first | | | last >
  • Streamline Your Sampling System

    Selecting the right stream selection assembly can improve performance.

    John Wawrowski, Doug Nordstrom and Joel Feldman, Swagelok Co.
    04/03/2009
  • 2008 Powder Show Round Up

    From the 2008 Powder Show: Mark Rosenzweig and Ken Schnepf bring you video interviews from Anhydro, Arizona Instrument, Gardner Denver, K-Tron and Readco Kurimoto

    05/28/2008
  • Don't err with Air Compressors

    Understand what's involved in getting a suitable supply of compressed air

    by David M. McCulloh, Mac Consulting Services
    04/10/2008
  • Portable conveyor speeds paint production

    Unit ensures a consistent flow of soft acrylic powder without lumps or sticking, improving the production of thermoplastic paint.

    Michel Podevyn, Spiroflow Systems, Inc.
    10/30/2007
  • Get the right cartridge or bag filter

    An inaccurately sized or improperly specified filter can undermine an entire high-performance liquid filtration system. There are a dozen key parameters to assess to determine the proper specification.

    Tim Mills, Kaydon Custom Filtration Corp.
    09/04/2007
  • Avoid blending blunders

    Selecting the correct device is crucial to successfully handling solids. It must deal with discrete pieces that have physical size, electrical properties, frictional differences and surface characteristics that can change with the environment.

    Tom Blackwood, Healthsite Associates
    09/04/2007
  • Equipment & Services: August

    Chemical Processing's Equipment & Services feature provides a variety of production equipment, supplier services and parts.

    08/22/2007
  • Equipment & Services: July

    Chemical Processing's Equipment & Services feature provides a variety of production equipment, supplier services and parts.

    07/24/2007
  • Two bulk conveyors prove better than one

    Engineers at EaglePicher Corp. in Quapak, Okla., faced some unique problems in manufacturing high-purity isotopic chemicals and wound up addressing them via a unique solution.

    David Boger, Flexicon Corp.
    07/11/2007
  • Optimize pump life cycle

    Understanding an operating system reduces costs and improves reliability. Getting the most out of your pump demands a well-thought-out, holistic strategy.

    Tom Carsten and Barry Erickson, Flowserve
    04/30/2007
  • Waylay weight woes

    Production managers, quality control managers and maintenance engineers alike have encountered weigh cells that never worked properly. Why? Why have so many switched from a supposedly high accuracy load cell solution to old fashioned level probes or sight glasses? This article touches on the worst culprits for problems and how to avoid them.

    Ryan Titmas, product manager, Sartorius North America
    01/08/2007
  • Avoid trouble with slurries

    Handling slurries (a mix of solids and liquids), should be based on experience and experiments, not theory. Much of the knowledge obtained from pneumatic conveyors and fluidization systems can be used in understanding slurries.

    Thomas R. Blackwood, Healthsite Associates
    11/01/2006
  • CAGI to verify compressor claims

    The compressed air industry is taking a step that will clear the air about the performance of its equipment. For the first time, many compressed air equipment manufacturers will submit their 50 hp to 200 hp lubricated rotary-screw compressors and 200 cfm to 1,000 cfm refrigerated air dryers to an independent laboratory for performance testing.

    Ken Byrd
    09/11/2006
41-60 of 79 < first | | | last >