Articles

341-360 of 430 < first | | | last >
  • Keep a steady eye on measurements

    While engineers often strive to keep processes running without too much variation, measurements that don’t change may be a cause for concern not celebration, as one refinery can attest.

    Andrew Sloley, contributing editor
    06/19/2006
  • Pumping Temperature Considerations

    "Bad actor" pumps are those pumps that have trouble with frequent and repetitive failures. In many cases, the source of the problem is an ANSI pump trying valiantly to handle a liquid well beyond the range of its design rating.of 300 degs. F.

    Ross Mackay
    06/19/2006
  • BP tackles Texas City failings

    British Petroleum's tragic March 2005 explosion has been well-documented through the press. Read here to find out how that tragedy spurred the development of a new program addressing management issues at BP.

    Foster Finley and Karl Roberts, AlixPartners
    04/12/2006
  • Hard lessons worth sharing

    Editor-in-Chief Mark Rosenzweig writes that the causes of two incidents should get attention from other processors.

    Mark Rosenzweig
    01/24/2006
  • Distillation control and optimization, Part 1

    Control columnist Bela Liptak describes the distillation process and PID-based controls, reviews optimization strategies, and shows how advanced controls can cut operating costs of distillation.

    Béla Lipták, PE, Control Columnist
    01/11/2006
  • Pumps benefit from a vane effort

    Widely used but underappreciated, back pump-out vanes extend bearings and seal life.

    Richard Nardone, ITT Industrial & BioPharm Group
    11/15/2005
  • pH linearization lubricates waste control

    Learn how a simplified technique for linearizing pH can enhance control in waste treatment applications and eliminate the need for gain-adjusting techniques.

    11/15/2005
  • 10 principles for securing control systems

    KEMA Consultant Jay Abshier takes an unbiased and highly detailed look at where plant security really is, and what is being done to better protect our process automation systems and infrastructure. Print page Email page 10 principles for securing control systems KEMA Consultant Jay Abshier takes an unbiased and highly detailed look at where plant security really is, and what is being done to better protect our process automation systems and infrastructure.

    10/25/2005
  • Find the best value seal

    A new industry-developed tool provides insights and practical guidance on seal economics.

    Pete Petrunich
    10/18/2005
  • Don’t let phase changes faze you

    Phase changes in the downstream processing or handling of solids cause many process problems that have inexpensive solutions.

    Tom Blackwood, Healthsite Associates LLC
    10/04/2005
  • Keep cool when designing batch reactors

    The stirred batch reactor is a workhorse at many plants. In designing such a unit, focus on effective temperature control to achieve optimum performance.

    John Edwards
    09/28/2005
  • Flow Meter Focus

    ChemicalProcessing.com introduces Flow meter focus, a compilation of useful articles, news, white papers and product information related to flow meters.

    09/28/2005
  • Today’s China Syndrome

    The country boasts not just booming exports but a strong desire for the best technology.

    Mike Spear, editor at large
    09/27/2005
  • Take safety up a notch

    There’s still room to improve industry’s good safety performance, says Editor in Chief Mark Rosenzweig in his monthly column. Mechanical integrity programs generally need more attention.

    Mark Rosenzweig, editor in chief
    08/25/2005
  • Can you safely grandfather your SIS?

    Making a claim that an existing safety instrumented system satisfies a new ANSI standard should not be taken lightly. Before doing so, it is essential to assess several critical factors.

    Angela E. Summers, SIS-TECH Solutions, LP
    08/11/2005
341-360 of 430 < first | | | last >