Articles

321-340 of 393 < first | | | last >
  • Process Industry Practices 9th Annual Conference

    The theme for this year’s PIP Conference was “Changing Times – The Common Denominator”. With over 140 registered attendees the conference included participants from member, subscriber, and licensee companies as well as other invited guests from the industry.

    Process Industry Practices
    05/10/2005
  • Process engineering: Dryer provides a concrete lesson in control

    Removing water or moisture from a liquid stream is a critical operation in many processes. Liquid stream dryers commonly contain either molecular sieves or adsorbents; during the last 20 years, the use of molecular sieves has become much more common.

    Andrew Sloley, contributing editor, and Richard Readshaw, senior staff process engineer for VECO USA Inc.
    05/03/2005
  • Process engineering: Doing your level best

    Plant engineers who find it is difficult to get good level measurements have plenty of company. A recent poll shows that it is considered to be one of the two most vexing problems by process automation professionals.

    04/08/2005
  • Compressed Air Systems: The Secret is in the Pipe

    There’s no such thing as too large a compressed air line.  A common error in compressed air systems is line sizes too small for the desired air flow.

    Hank van Ormer, Don van Ormer and Scott van Ormer
    03/14/2005
  • Process engineering: Avoid pitfalls when starting up pumps

    Improper startup can result in excessive temperature and radial loading, both of which can lead to lower pump reliability from problems such as seal and bearing failure. Consultant Ross Mackay describes the three steps that should be followed during pump startup.

    03/14/2005
  • Chemical research gets a new look

    Editor at large Nick Basta looks at what the chemical industry can do to re-invigorate its technological research. He says technology pioneered in the pharmaceutical industry promises broad benefits.

    03/11/2005
  • Process engineering: In the trenches of Fieldbus War II

    Like the 20th Century’s Great Conflict, the first Fieldbus War never really ended. But what will the outcome be this time? This article from CONTROL makes an educated prediction on how the battle may turn out.

    03/10/2005
  • HART Devices - Dispelling the Myths

    Myths and misconceptions surround the HART Communication technology despite being in use for as many as 15 years in some places. This article dispels those myths and highlights the benefits of HART.

    Ed T. Ladd, Jr., HART Communication Foundation, Austin, Texas
    03/10/2005
  • Process Engineering: Measure problems on a higher level

    A reader has a level measurement problem with a differential pressure level transmitter. The transmitter does not track the level properly. Check out the question and the in-depth answer in this contribution from ControlGlobal.com.

    03/03/2005
  • Process engineering: Is your pump cavitating?

    That rumbling/rattling noise you hear from your pump is the symptom for any number of potential problems. The first step is identifying the problem. This article will help you determine what exactly is wrong with your pump.

    Ross Mackay
    02/15/2005
  • Automation & IT: Making a HART connection

    This article is the first in a series of web-exclusive items designed to increase your knowledge about the HART Field Communications Protocol. Read here to find out the benefits of using HART Communication.

    Ed T. Ladd, Jr., HART Communication Foundation, Austin, Texas
    02/10/2005
  • Process engineering: Fieldbus is here - are you ready?

    Digital-based protocols, such as those used by fieldbus technology, are finding their way into a wider range of plant automation technologies. Read about the Fieldbus Foundation and how its technology can be implemented at your plant.

    Joe Conklin, Fieldbus Foundation
    02/10/2005
321-340 of 393 < first | | | last >