Articles

321-340 of 377 < first | | | last >
  • Today’s China Syndrome

    The country boasts not just booming exports but a strong desire for the best technology.

    Mike Spear, editor at large
    09/27/2005
  • Take safety up a notch

    There’s still room to improve industry’s good safety performance, says Editor in Chief Mark Rosenzweig in his monthly column. Mechanical integrity programs generally need more attention.

    Mark Rosenzweig, editor in chief
    08/25/2005
  • Can you safely grandfather your SIS?

    Making a claim that an existing safety instrumented system satisfies a new ANSI standard should not be taken lightly. Before doing so, it is essential to assess several critical factors.

    Angela E. Summers, SIS-TECH Solutions, LP
    08/11/2005
  • Getting batch material transfers under control

    Batch material transfer control seems an easy task to carry out, but the reality is that many functions are necessary if the system is to accomplish accurate batch material transfer control. Weighing systems with device-level controls can help.

    08/10/2005
  • Efficient batch control

    Efficient batch control can be both an art and science, so act accordingly for best results, and always remember "it's survival of the fittest" out there.

    07/13/2005
  • Process Engineering: HART Offers Value in Plant Control Systems

    There's a myth in plants that HART offers little for Plant Control Systems and Enterprise Level Networks. But Ed Ladd from the HART Communication Foundation writes that by accessing the data in HART devices on a "full-time" routine basis increases performance, integrity, and reliability of plant control and enterprise level systems.

    Ed T. Ladd, Jr., HART Communication Foundation, Austin, Texas
    05/11/2005
  • Process Industry Practices 9th Annual Conference

    The theme for this year’s PIP Conference was “Changing Times – The Common Denominator”. With over 140 registered attendees the conference included participants from member, subscriber, and licensee companies as well as other invited guests from the industry.

    Process Industry Practices
    05/10/2005
  • Process manufacturing: No transfer required

    As the pharmaceutical industry has matured, concerns about the safe handling of drug compounds during the manufacturing process have increased. To meet exposure limits and protect batches from any kind of contamination, the industry’s need for improved containment has increased.

    Diane Dierking
    05/04/2005
  • Process engineering: Dryer provides a concrete lesson in control

    Removing water or moisture from a liquid stream is a critical operation in many processes. Liquid stream dryers commonly contain either molecular sieves or adsorbents; during the last 20 years, the use of molecular sieves has become much more common.

    Andrew Sloley, contributing editor, and Richard Readshaw, senior staff process engineer for VECO USA Inc.
    05/03/2005
321-340 of 377 < first | | | last >