Articles
| Title/Author | Date |
|---|---|
|
Save a bundle solving pressure-drop problems Pressure drop in compressor-suction and interstage coolers often creates problems. In some cases, just a few pounds of extra pressure drop make a revamp unworkable. |
11/04/2004 |
|
Process integration extends its reach Thousands of successful applications worldwide testify to the value of process integration technology in reducing energy costs and increasing capacity through debottlenecking. |
11/01/2004 |
|
Better damper control delivers big savings | Chemical Processing Installing an electric drive on a steam boiler damper results in lower fuel consumption. The reason? The electric drive enables boiler operation with just the right amount of excess air at lower firing rates. |
11/01/2004 |
|
Cost and design improvements are spurring increasing use, particularly for handling hazardous fluids. |
09/16/2004 |
|
Second-order instruments can provide improved accuracy and reliability for electrochemical and other sensors. |
09/16/2004 |
|
Energy savings are in the air | Chemical Processing Anywhere compressed air can be eliminated represents an opportunity to reduce system operating expenses. Often, this reduction means fewer compressors must operate to meet the plant's air requirements. |
08/05/2004 |
| 07/01/2004 | |
|
Understand the Attraction of Magmeters Magnetic flowmeters provide accuracy and can be used in a variety of applications and environments |
07/01/2004 |
|
The recent painful downturn and high energy costs are pushing corporate managers in the chemical industry to do whatever they can to improve company margins. |
06/01/2004 |
|
Electric motors in continuous or near-continuous service have high energy costs, even at the relatively low electric rates common in much of the chemical industry. Don't squander savings opportunities when considering motor replacement |
05/13/2004 |
|
Achieving optimum system efficiency demands paying close attention to compressor signal location |
05/13/2004 |
|
Don't Send Money Down the Drain A versatile system meets Federal standards while minimizing VOCs in wastewater |
03/31/2004 |
| 03/29/2004 | |
| 03/29/2004 | |
|
Plugging hampers solids' Removal A reader seeks an answer to the best way to control solids' removal rate from an evaporator. |
03/11/2004 |
|
Information about heat transfer fluid (HTF) systems and the specifications for applicable fluids can be retrieved directly from the web sites of many HTF manufacturers |
03/08/2004 |
|
Better Damper Control Nixes NOx Installing accurate inline oxygen analyzers and precision draft controls can optimize emissions reductions and fuel savings |
03/03/2004 |
| 03/03/2004 | |
| 03/02/2004 | |
|
Motor drives may be ubiquitous, but do you really understand how they work? |
12/05/2003 |
