Articles

281-300 of 356 < first | | | last >
  • Sulzer Chemtech relocates to new, expanded facility

    Recognized throughout the world for decades as an innovator in the field of mass transfer products, Sulzer Chemtech opened its first Houston facility in 1998. That was the first step in a series of moves designed to position the company in the U.S. market.

    04/10/2007
  • How hydraulic modeling can improve the efficiency of your pump systems

    In spite of their large operating cost, most pump systems are inefficient by design. Among the common design problems are non-optimal pipe sizing, control valve utilization and, perhaps most common, incorrectly sized pumps. How a pump operates depends on the system, so improvements must focus on the system as a whole.

    Tom Glassen
    02/20/2007
  • Chemical security rules edge forward

    Advance rulemaking was recently issued on anti-terrorism standards. Lynn Bergeson provides a summary in monthly Compliance Advisor column.

    Lynn Bergeson, regulatory editor
    02/12/2007
  • Understand and Control Hot Vapor Bypass

    Contributing Editor Andrew Sloley says pressure control technique works well if implemented properly, in this month's Plant InSites column.

    Andrew Sloley, contributing editor
    01/08/2007
  • Vehicle emissions case promises broad impact

    A Supreme Court ruling could affect voluntary efforts to reduce greenhouse gas emissions, according to Mike Spear, editor at large, in his monthly End Point column.

    Mike Spear, editor at large
    01/08/2007
  • Expect tighter particulate matter standards

    Tighter particulate matter standards are in our future, according to Regulatory Editor Lynn Bergeson in this month's Compliance Advisor column on ChemicalProcessing.com

    Lynn Bergeson, regulatory editor
    09/21/2006
  • Process analysis gains greater online role

    Faster. Smaller. Smarter. Modular. All express the future of process analytics. And un-stoppable describes the ongoing migration of process analytical instruments to continuous, online, field-mounted use at chemical plants.

    C. Kenna Amos, contributing editor
    09/11/2006
  • 2006 Readers' Choice Survey

    The equipment, services and suppliers selected to make a job easier greatly contribute to on-the-job success. The Readers' Choice survey identifies the leading vendors in more than 40 categories.

    Ken Schnepf, managing editor
    08/17/2006
  • Better Design Is No Pipe Dream

    The benefits of using pipeline simulation tools at the piping and instrumentation diagram (P&ID) level, rather than running simulations just on the process flow diagram, can often be overlooked.

    Mike Spear, editor at large
    07/17/2006
  • Wireless wins wider role

    Wireless is poised for a big breakthrough in plant operations because of its ease of use, safety and potential for energy savings.

    C. Kenna Amos, contributing editor
    03/14/2006
  • Savor your slide rule

    This long-time symbol of engineering has retained its value, says Editor in Chief Mark Rosenzweig in his monthly column.

    Mark Rosenzweig
    02/20/2006
  • Ultrasonics makes sound progress

    Learn about how ultrasonics can enhance crystallization, as well as other plant operations.

    Wayne Genck, Genck International
    01/01/2006
  • Evaluate reactivity with limited resources

    The initial critical steps of reactivity risk reduction need not be expensive, time consuming and require extensive expertise.

    W. J. Rogers, C. Wei and M. S. Mannan, Mary Kay O’Connor Process Safety Center
    11/27/2005
  • Dig Deeper to Find More Capacity

    Pipeline simulation software can uncover hidden causes of capacity bottlenecks.

    Todd J. Willman, EPCON International, Reuben Gates, Shell Chemical LP, and Mark Haboian, Eastman Kodak Co.
    11/09/2005
  • The Synergy of Simulation, Experimentation and Technical Support Activities in a Research Consortium

    For the business of designing process heat exchangers, computational fluid dynamics (CFD) tools are still not practical for everyday use. However, in a research consortium such as HTRI, integrating advanced analysis tools like CFD with industrial-sized experimentation and then applying them to real-world technical problems provides a significant synergistic benefit to the consortium members.

    Kevin J. Farrell
    11/06/2005
281-300 of 356 < first | | | last >