2541-2560 of 3007 < first | | | last >
  • Pumping Temperature Considerations

    "Bad actor" pumps are those pumps that have trouble with frequent and repetitive failures. In many cases, the source of the problem is an ANSI pump trying valiantly to handle a liquid well beyond the range of its design rating.of 300 degs. F.

    Ross Mackay
  • Increase pump performance

    In this web exclusive on, pump expert Ross Mackay says a key to a pump's performance is to look at the control system it's running with.

    Ross Mackay
  • Treat Tanks with Care

    A variety of easily avoided problems can cause vessel failure.

    Roy E. Sanders, chemical process safety consultant
  • Valve innovation helps with nuclear waste

    Valves and actuators designed for handling radioactive waste must meet strict government requirements. This sometimes requires unconventional solutions. Such was the case at the Hanford Waste Treatment Project (WTP), Hanford, Wash.

    Roy Johnson, Flowserve
  • Executing Alarm Management

    For you to succeed in advancing your strategy, while keeping the peace, you must meet many challenges — motivating personnel and juggling the integration of changes. The solution is better plant-wide communication and understanding of the alarm philosophy.

    Roy Tanner, and Rob Turner ABB and Jeff Gould, Matrikon
  • Seal in long-term savings

    When it comes to minimizing costs, the traditional focus on component or unit cost may be giving way to an alternative approach. Indeed, more and more users are deciding that the long-term benefits of premium-priced elastomeric seal technology outweigh the initial investment.

    Russell Schnell, DuPont Performance Elastomers
  • Waylay weight woes

    Production managers, quality control managers and maintenance engineers alike have encountered weigh cells that never worked properly. Why? Why have so many switched from a supposedly high accuracy load cell solution to old fashioned level probes or sight glasses? This article touches on the worst culprits for problems and how to avoid them.

    Ryan Titmas, product manager, Sartorius North America
  • Trending Does the Trick

    Charting real-time data helps improve process control at chemical plant in Pasadena, Texas. Statistical process control data are an important part of day-to-day decision-making.

    Sandra Schiller
  • Become a more efficient chemical plant employee

    Plant employees aren't all that different from plant equipment. Both need to be efficient without being over-worked. This article details the things you can do to be more effective at your job.

    Sandy Baker, P.E., Exceedance
  • Make the Most of Radar

    Following some best practices can ensure accurate level measurement.

    Sarah Parker, Emerson Process Management
  • Continuous Powder Processing Focuses On Tubular Blenders

    Science-based methods for process scale-up must be developed.

    Sarang Oka & Fernando Muzzio, Department of Chemical & Biochemical Engineering, Rutgers University, for our sister publication Pharmaceutical Manufacturing.
2541-2560 of 3007 < first | | | last >