Articles

241-260 of 305 < first | | | last >
  • Don’t shackle yourself to the wrong platform

    Today, process data are readily available at many levels, from instrumentation to higher-level data historians and OPC servers. Choosing the right platform can be key to successfully implementing robust and maintainable process calculations at your company.

    Dane Overfield, Exele Information Systems
    03/14/2007
  • Pressure tests can spur successful start-up

    Push it: if it breaks it probably needed to be replaced, says Dirk Williard, in this month's Field Notes column. Doing so can help improve your processes.

    Dirk Willard, senior editor
    03/01/2007
  • Take the pressure off pressure control

    Linkage of other variables can stymie hot vapor bypass schemes, according to Andrew Sloley's Plant InSites column.

    Andrew Sloley, contributing editor
    02/19/2007
  • pH sensor stands up to tough conditions

    Design provides improved reliability in a polymer-precursor batch reactor. Sensors must respond quickly and survive a harsh environment. Poor probe reliability can make the difference between a process that makes money and one that doesn’t.

    Kyle Becker, Polychemie
    01/08/2007
  • Distillation control and optimization, Part 3

    Control's Béla Lipták continues his series on control of distillation processes, this time focusing on managing reboiler flow, temperature, feed rate, loading and reflux for economy, stability and safety.

    Béla Lipták, PE, CONTROL Columnist
    01/05/2007
  • pH measurement faces acid test

    Quest for more reliable readings prompts development of tougher and more-intelligent sensors. While pH control often plays a crucial role in processing, achieving reliable readings remains challenging at many sites. After all, pH sensors frequently serve in aggressive chemical environments.

    C. Kenna Amos, contributing editor
    12/05/2006
  • NeSSI’s success should be a lock

    The New Sampling/Sensor Initiative or NeSSI that replaces tubing, fittings and other hardware in a sampling system with miniature modular components makes sense. Enhancements now in the works should assure its success.

    Mark Rosenzweig, editor in chief
    11/29/2006
  • Keep measurements on the level

    This article looks at six technologies — mechanical floats and displacers, differential pressure, capacitance, ultrasonic, radar, and guided wave radar — that are used most often for automated control, and provides practical guidance for choosing among them.

    Jerry Boisvert, Siemens Energy & Automation
    11/01/2006
  • Outsourcing innovation development

    A new development method may allow breaking away from the pack as companies continue to employ outsource facilities that offer flexibility and foster innovation.

    Chuck Kenney, Pressure Chemical Company
    10/31/2006
  • NeSSI tames the communications monster

    The new sampling/sensor initiative (NeSSI) is moving steadily to fulfill its original promise of increased efficiencies, costs-savings, and micro-analytic capabilities despite recent growing pains related to fieldbus.

    Jim Montague, Executive Editor
    09/15/2006
  • Energy savings are often disguised as problems

    Carefully managing compressed air can save money. Compressed air is often overlooked in energy studies because many people do not fully understand compressed air equipment, their own system, or what it costs to produce compressed air power.

    Scott Van Ormer and Don Van Ormer, senior application engineers, Air Power USA
    08/18/2006
  • How to select control valves, Part 1

    When it comes to selecting and sizing control valves, the non-commercial chart in this article not only helps you pick the right one for the job, but also serves as a reference tool you can download.

    Béla Lipták, PE, CONTROL Columnist
    08/15/2006
  • Choose the right temperature sensor

    There’s no simple solution to achieving accurate temperature measurement. It’s a combination of knowing the inherent accuracy of particular sensor types, and how environmental factors can create further measurement uncertainty and the sensor calibration techniques available to reduce this uncertainty.

    Cal Swanson, Watlow Electric Manufacturing Co.
    04/24/2006
  • Soft sensors win hard jobs

    Virtual instruments are gaining increasing roles — and capabilities — for closed-loop process control.

    C. Kenna Amos, contributing editor
    01/04/2006
  • pH linearization lubricates waste control

    Learn how a simplified technique for linearizing pH can enhance control in waste treatment applications and eliminate the need for gain-adjusting techniques.

    11/15/2005
  • Today’s China Syndrome

    The country boasts not just booming exports but a strong desire for the best technology.

    Mike Spear, editor at large
    09/27/2005
  • Simulated Moving Bed Chromatography Offers Real Attractions

    A continuous purification technique, simulated moving bed chromatography combines high yields and purities with easy scale up and reasonable throughputs.

    Kathleen Mihlbachler, Eli Lilly and Company, and Olivier Dapremont, Aerojet Fine Chemicals
    08/31/2005
241-260 of 305 < first | | | last >