Articles

241-260 of 356 < first | | | last >
  • Two bulk conveyors prove better than one

    Engineers at EaglePicher Corp. in Quapak, Okla., faced some unique problems in manufacturing high-purity isotopic chemicals and wound up addressing them via a unique solution.

    David Boger, Flexicon Corp.
    07/11/2007
  • Squeeze More from Your Motors

    By integrating smart motor control centers that will monitor energy consumption a plant can remove wasteful energy expenditure, prevent unplanned downtime, and improve overall operational efficiency. Recent tax code amendments make these improvements inviting.

    Moin Shaikh, Siemens
    06/07/2007
  • What is taking so long?

    Despite its 30-plus-year history, advanced process control (APC) applications remain few and far between, but it doesn’t need to be that way. Dave Harrold, cofounder of the AFAB Group, reports.

    06/01/2007
  • Foundation fieldbus in hazardous areas

    Implementing Foundation fieldbus can seem like a daunting task, and when coupled with hazardous-area considerations, may approach information overload; however, it doesn't have to be an explosive concept.

    06/01/2007
  • Control valves for slurry service

    In this installment of Ask The Experts, noted process control authority and CONTROL Columnist Béla Lipták and his cadre of automation experts answer a reader’s question regarding control valves for slurry services.

    05/01/2007
  • Defeat barriers to energy cost control

    Use communications and incentives to overcome “The Competitor Within", advises Christopher Russell in this month's Energy Saver column.

    Christopher Russell, contributing editor
    04/24/2007
  • Final control

    What’s the latest on control valves? Here's a look at the current marketplace for the final element that all control stuff is aimed at—the control valve that produces the end result.

    Walt Boyes, Editor in Chief
    04/17/2007
  • Achieve continuous safety improvement

    Enhancing safety performance requires diligence and unrelenting effort. The Independent Safety Review Panel’s recently released report on the safety culture and practices at BP’s U.S. refineries where a March 2005 explosion occurred in Texas City, Texas indicates similar failings are likely elsewhere in the industry. Learn what can be done to enhance continuous safety improvement.

    Angela Summers, SIS-TECH Solutions
    04/12/2007
  • Still pondering whither fieldbus?

    In this month's installment of On the Bus, Contributing Editor John Rezabek predicts HART devices will work so well that your career may be over before you can justify the cost to replace them with fieldbus.

    John Rezabek, Contributing Editor
    03/03/2007
  • NeSSI taxis for takeoff

    Though acceptance and networking hurdles remain, the New Sampling/Sensor Initiative (NeSSI) is starting to emerge in real-world, standardized, modular process control applications.

    Jim Montague, Executive Editor
    03/03/2007
  • The evolution of plant automation

    Understanding the purpose of control and safety systems helps users ensure each is appropriately optimized. The duties of the SIS are to protect the people, environment and assets against unsafe conditions.

    Angela Summers, PhD, PE, founder of SIS-TECH Solutions
    03/03/2007
  • Pressure control optimization

    Floating pressure control means that, at minimum pressure, the heat required at the reboiler is minimized, its capacity is increased, and fouling is reduced.

    Béla Lipták, PE, CONTROL Columnist
    03/03/2007
  • Take the pressure off pressure control

    Linkage of other variables can stymie hot vapor bypass schemes, according to Andrew Sloley's Plant InSites column.

    Andrew Sloley, contributing editor
    02/19/2007
  • The intrinsically safe fieldbus has arrived

    Fieldbus has proven its merit in bringing projects online more efficiently, allowing better diagnostics, and control, and reducing maintenance costs and inventories. However, it has been limited in intrinsically safe services. At last, technology has come through once again with a solution. The capacity barrier of FISCO has now been significantly surpassed by a novel split architecture design that has already proven itself in the field.

    Dr. Dave Rizzo, Power PR
    02/09/2007
  • The DCS spirit lives on everywhere

    Classic distributed control systems typically remain only in high-availability refining and power applications, but their strategies and capabilities persist in descendants and today’s sophisticated networks.

    Jim Montague, Executive Editor
    02/09/2007
  • Best practices in control system migration

    Migration from your old control system to a new one is as an inevitable as death and taxes. But, the key to minimizing the pain is to abide by the control system migration best practices listed here.

    Dan Hebert, PE, Senior Technical Editor
    02/09/2007
  • Debunk plant myths about diagnostics

    Your current control system can probably do more than you think. Everybody can agree that diagnostics are a good thing — they can identify problems early, and keep the plant running at peak performance. Learn how your existing control systems and analog instruments can deliver diagnostic capabilities, at a fraction of the cost of system or instrument replacements.

    George Buckbee, ExperTune, Inc.
    02/08/2007
241-260 of 356 < first | | | last >