Articles

2261-2280 of 2472 < first | | | last >
  • Nominations open for Plant Innovation Award

    The award is presented annually to recognize innovative solutions to processing problems at chemical plants throughout the world. Nominate a worthy candidate today.

    01/01/2005
  • Expert Advice Maximizes Optimizer Value

    A combination closed-loop optimizer and G2 expert system allowed a largy chemical company to save more than a million dollars in reduced overall energy demand.

    James F. Sturnfield, Union Carbide Corp.
    12/21/2004
  • Models Take off

    Process simulation historically has taken place within proprietary modeling environments. However, the ability of simulators to more accurately handle demanding tasks continues to evolve.

    Mark Rosenzweig
    12/21/2004
  • Double up to contain leaks

    Chemical companies are faced with numerous decisions about how to address a variety of major environmental and safety issues.  Many are finding a simple solution in dual-wall piping systems.

    Nick Basta, editor at large
    12/20/2004
  • Save a bundle solving pressure-drop problems

    Pressure drop in compressor-suction and interstage coolers often creates problems. In some cases, just a few pounds of extra pressure drop make a revamp unworkable.

    Andrew Sloley
    11/04/2004
  • Keep temperature control out of hot water

    Readers offer tips about how to control the temperature of a water stream. (From the Process Puzzler column in November 2004 Chemical Processing magazine.)

    11/01/2004
  • Lights up on emissions monitoring

    This article takes a new look at optical remote sensing (ORS) technology — which has become simpler, more reliable and more accurate, yet its popularity for monitoring emissions has not grown.

    Nick Basta
    11/01/2004
  • Process integration extends its reach

    Thousands of successful applications worldwide testify to the value of process integration technology in reducing energy costs and increasing capacity through debottlenecking.

    Robin Smith
    11/01/2004
  • Better damper control delivers big savings

    Installing an electric drive on a steam boiler damper results in lower fuel consumption. The reason? The electric drive enables boiler operation with just the right amount of excess air at lower firing rates.

    Joshua I. Anderson,&nbsp;Adolfo B. Aparicio and Scott T. Rutkoski
    11/01/2004
  • Keep motor drives ready for action

    Annually reforming stored or non-operational drives ensures that they remain ready to operate at peak performance. Failing to do this can lead to capacitor damage when the converter starts to operate.

    Kjell Ingman and Mikko Lammi
    10/16/2004
  • Improve Your Project's Prospects

    Management always strives to increase the corporation's long-term value to its owners. As a result, it is very important to understand how they assess potential investments to get your project approved.

    Douglas C. White
    10/08/2004
2261-2280 of 2472 < first | | | last >