Articles

221-240 of 295 < first | | | last >
  • EPA assesses link to greenhouse gases

    Steps taken during manufacturing can significantly impact landfill emissions, advises Lynn Bergeson, regulatory editor, in this month's Compliance Advisor column.

    Lynn Bergeson, regulatory editor
    09/27/2007
  • Need a tower internal specialist?

    For over 35 years, the Sulzer Chemtech Field Services group has been a successful tower internals specialty company, performing tray and packing installation, tower maintenance and plant turnaround projects.

    09/17/2007
  • Membrane Boasts Material Benefits

    As economical separation of contaminants from natural gas becomes increasingly important, simulation eases the design of innovative module to remove carbon dioxide. Membranes offer potential advantages over other methods.

    Paul J. Rubas and Kevin R. Geurts, ExxonMobil Upstream Research Co.
    09/11/2007
  • Get the right cartridge or bag filter

    An inaccurately sized or improperly specified filter can undermine an entire high-performance liquid filtration system. There are a dozen key parameters to assess to determine the proper specification.

    Tim Mills, Kaydon Custom Filtration Corp.
    09/04/2007
  • Correct those disturbing lapses

    Keeping liquid in a reflux drum still can prevent problems, says Andrew Sloley, in this month's Plant InSites column.

    Andrew Sloley, contributing editor
    08/31/2007
  • Equipment & Services: August

    Chemical Processing's Equipment & Services feature provides a variety of production equipment, supplier services and parts.

    08/22/2007
  • New seals get their turn

    As pressure rises on plants to improve productivity and equipment reliability levels, seals and gaskets are being called upon to provide even better performance. Their challenge no longer is simply to prevent leaks but also to play an important role in the life-cycle management of the plant.

    Mike Spear, editor at large
    07/24/2007
  • Equipment & Services: July

    Chemical Processing's Equipment & Services feature provides a variety of production equipment, supplier services and parts.

    07/24/2007
  • Properly deliver compressed gases

    From large petrochemical units to tiny pharmaceutical pilot plants, day-to-day operations depend upon providing compressed gases in a controlled, safe and environmentally conscious manner. Correct gas handling also can improve process efficiency.

    Larry Gallagher, CONCOA
    05/08/2007
  • Dow aims to gas up methane conversion efforts

    Mike Spear, editor at large discusses how researchers can submit simple proposals but must forego royalties in this month's End Point column.

    Mike Spear, editor at large
    04/24/2007
  • Choose the right fluid for your pressure test

    Compressed gas often makes the most sense for checking a process, according to Senior Editor Dirk Willard, in this month's Field Notes column.

    Dirk Willard, senior editor
    04/12/2007
  • Vehicle emissions case promises broad impact

    A Supreme Court ruling could affect voluntary efforts to reduce greenhouse gas emissions, according to Mike Spear, editor at large, in his monthly End Point column.

    Mike Spear, editor at large
    01/08/2007
  • Mechanical Seals: Gas Up Your Sealing Knowledge

    As users become more familiar with gas seal technology and its advantages, gas seals are being applied to a wider variety of applications and equipment than ever before. As the seals gain in popularity know their advantages and disadvantages.

    Scott Boyson, Chesterton
    12/05/2006
  • Piping for toxic and hazardous gases

    When processes change and plants need to install any of several types of ultra-high-purity process gases, specifying an appropriate piping system is crucial. Learn about a sound system design that maximizes efficiency, purity and safety.

    Jeffrey S. Close
    09/11/2006
  • CAGI to verify compressor claims

    The compressed air industry is taking a step that will clear the air about the performance of its equipment. For the first time, many compressed air equipment manufacturers will submit their 50 hp to 200 hp lubricated rotary-screw compressors and 200 cfm to 1,000 cfm refrigerated air dryers to an independent laboratory for performance testing.

    Ken Byrd
    09/11/2006
221-240 of 295 < first | | | last >