Articles

221-240 of 282 < first | | | last >
  • Keep lobes in mind

    Understand why and when to consider these positive-displacement pumps.

    John Hall, Viking Pump, Inc.
    01/03/2006
  • Pumps benefit from a vane effort

    Widely used but underappreciated, back pump-out vanes extend bearings and seal life.

    Richard Nardone, ITT Industrial & BioPharm Group
    11/15/2005
  • pH linearization lubricates waste control

    Learn how a simplified technique for linearizing pH can enhance control in waste treatment applications and eliminate the need for gain-adjusting techniques.

    11/15/2005
  • Find the best value seal

    A new industry-developed tool provides insights and practical guidance on seal economics.

    Pete Petrunich
    10/18/2005
  • Flow Meter Focus

    ChemicalProcessing.com introduces Flow meter focus, a compilation of useful articles, news, white papers and product information related to flow meters.

    09/28/2005
  • Saving energy with fluid handling

    This article from Ross Mackay, an exclusive contributor to ChemicalProcessing.com and author of The Practical Pumping Handbook, discusses how you can save energy in your plant with proper pump selection.

    Ross Mackay
    09/20/2005
  • Take safety up a notch

    There’s still room to improve industry’s good safety performance, says Editor in Chief Mark Rosenzweig in his monthly column. Mechanical integrity programs generally need more attention.

    Mark Rosenzweig, editor in chief
    08/25/2005
  • Can you safely grandfather your SIS?

    Making a claim that an existing safety instrumented system satisfies a new ANSI standard should not be taken lightly. Before doing so, it is essential to assess several critical factors.

    Angela E. Summers, SIS-TECH Solutions, LP
    08/11/2005
  • Getting batch material transfers under control

    Batch material transfer control seems an easy task to carry out, but the reality is that many functions are necessary if the system is to accomplish accurate batch material transfer control. Weighing systems with device-level controls can help.

    08/10/2005
  • Become a PSAT Qualified Pump Specialist

    The Hydraulic Institute and the U.S. Department of Energy have partnered to offer a two-day PSAT Qualification Workshop to be held September 7-8 in Dallas, Texas.

    07/18/2005
  • Use operators to boost pump reliability

    Preventing pump problems before they happen is the best way to save costs, and it is the operators who are the key to your pump maintenance.

    Ross Mackay
    06/15/2005
221-240 of 282 < first | | | last >