Articles

221-240 of 297 < first | | | last >
  • Avoid Costly Fabrication Mistakes

    Common oversights keep plants from getting the most reliable and suitable vessels

    Chip Eskridge, Jacobs, Mike James, DuPont, and Steve Zoller, Enerfab
    05/02/2008
  • Keeping on the Level

    Measuring the level of solids can be tricky. Ultrasonic and laser measurement may be the answer.

    02/25/2008
  • Plug cyber-security gaps

    With the new “high risk chemical facilities” federal anti-terrorism regulations, it’s time for the chemical industry to ratchet up its cyber-security efforts. There’s a surge in interest in cyber-subjects such as security certification, defense-in-depth strategies, risk-based planning and improved policies and procedures.

    Seán Ottewell, contributing editor
    08/31/2007
  • Sleep with the enemy

    Stop fighting environmentalists and embrace them because it’s good for the planet and business. The challenge for the chemical industry is to win support in the court of public opinion before building or expansion plans run into trouble. And the key to that lies in a company’s willingness to understand the complex and sometimes conflicting motives of opposition groups and to communicate effectively to all constituencies.

    Alan Metrick, Alan Metrick Communications
    07/24/2007
  • Better water technology is on tap

    The drought in many parts of the U.S. so far this summer points out the preciousness of water supplies. There’s greater demand for waste-minimization and recycle-and-reuse technologies as well as more awareness of utility usage and the impact of life-cycle costs on water-treatment operations. Here’s a look at new technologies that will help.

    C. Kenna Amos, contributing editor
    07/24/2007
  • Get ready to comply with new security mandates

    New anti-terrorism standards require the Department of Homeland Security to identify and regulate "high-risk chemical facilities." These facilities will be subject to a security vulnerability assessment. Where does your plant fit in with these new standards?

    David A. Moore and Dorothy Kellogg, AcuTech Consulting Group
    05/29/2007
  • More about cost estimating process analyzer projects

    Gary Nichols concludes his series on the proper design and project management of process analyzer systems, this time addressing estimate accuracy and cost by project stage and work breakdown structure.

    Gary D. Nichols, PE, Principal Control Systems Engineer, Jacobs Engineering Group
    05/01/2007
  • Cost estimating for process analyzer projects

    This article addresses cost estimating for capital projects on which an analyzer system is installed, through start-up and commissioning of the project, to the resultant lifetime cost savings that can be gained.

    Gary D. Nichols, PE, Principal Control Systems Engineer, Jacobs Engineering Group
    03/30/2007
221-240 of 297 < first | | | last >