Articles

2141-2160 of 2520 < first | | | last >
  • What price is right?

    Minimizing costs is only one part of the economic equation for profitability.

    Mark Rosenzweig
    09/27/2005
  • Today’s China Syndrome

    The country boasts not just booming exports but a strong desire for the best technology.

    Mike Spear, editor at large
    09/27/2005
  • Saving energy with fluid handling

    This article from Ross Mackay, an exclusive contributor to ChemicalProcessing.com and author of The Practical Pumping Handbook, discusses how you can save energy in your plant with proper pump selection.

    Ross Mackay
    09/20/2005
  • Answering the need for Fieldbus

    This exclusive piece from the Fieldbus Foundation gives a general overview of Fieldbus technology and how it can help you in your plant.

    Joe Conklin, Fieldbus Foundation
    09/14/2005
  • New data support development of spiral plate heat exchanger software

    HTRI has conducted extensive testing on a spiral-spiral single-phase flow unit for a wide range of Reynolds (6.5 to 74,000) and Prandtl (3.8 to 2260) numbers. These data were used to evaluate open literature and HTRI methods.

    Fernando J. Aguirre/Christopher A. Bennett
    09/02/2005
  • Simulated Moving Bed Chromatography Offers Real Attractions

    A continuous purification technique, simulated moving bed chromatography combines high yields and purities with easy scale up and reasonable throughputs.

    Kathleen Mihlbachler, Eli Lilly and Company, and Olivier Dapremont, Aerojet Fine Chemicals
    08/31/2005
  • Build up agglomerate quality

    Several easy-to-use indices related to material flow properties can help to predict and improve an agglomeration process and product quality.

    Kristin O’Quest and Lee Dudley, Diamondback Technology, Inc.
    08/31/2005
  • Take safety up a notch

    There’s still room to improve industry’s good safety performance, says Editor in Chief Mark Rosenzweig in his monthly column. Mechanical integrity programs generally need more attention.

    Mark Rosenzweig, editor in chief
    08/25/2005
2141-2160 of 2520 < first | | | last >