Articles

2101-2120 of 2558 < first | | | last >
  • Oil refinery minimizes manual tank measurements

    The strategy was to enhance plant profitability, increase throughput capacity, upgrade product yields and improve on-stream reliability. Read here to find out what they accomplished.

    Sean Leonard, Matrikon
    02/10/2006
  • Disposable equipment makes lasting gains

    Biopharmaceutical producers and others are turning more to single-use units. Is this a good idea for your plant?

    Alan S. Brown, contributing editor
    02/06/2006
  • Who Will Manage Your Industrial Energy Costs?

    Energy cost control is not a one-time event, and it takes more than one tool to make progress. A number of people, both internal and external to an industrial facility, can contribute to effective energy management.

    Christopher Russell
    02/03/2006
  • Motives and rewards for managing plant-wide energy consumption

    What are the motives for managing energy in today’s lean competitive environment? Industry’s motives and rewards for managing their energy include plant reliability, speed, flexibility, product quality, and greater capacity to generate revenue.

    Christopher Russell
    02/03/2006
  • Feedstock change is hot and poppin’

    Corn, other renewable resources garner increasing interest and investment. Read here about the progress that is being made in discovering a new generation of feedstock.

    Bill Gerards, contributing editor
    01/24/2006
  • Don’t let a start-up finish you off

    Senior Editor Dirk Willard spent years as a "start-up" engineer. He advises that proper planning is crucial for achieving a happy ending.

    Dirk Willard, senior editor
    01/24/2006
  • Hard lessons worth sharing

    Editor-in-Chief Mark Rosenzweig writes that the causes of two incidents should get attention from other processors.

    Mark Rosenzweig
    01/24/2006
  • Safeguard plant safety

    The worst thing that can happen at your plant is that an employee suffers a serious injury from a preventable accident. Follow some proven maintenance pointers to keep operations safe.

    Joe Kaulfersch, Pepperl+Fuchs
    01/23/2006
  • Collar hazards with a Bow-Tie

    A flexible, graphical method offers many advantages for initial process hazard analyses. Read here for a detailed explanation of the Bow-Tie method.

    Jack Philley, Baker Engineering and Risk Consultants, Inc.
    01/23/2006
  • Distillation control and optimization, Part 1

    Control columnist Bela Liptak describes the distillation process and PID-based controls, reviews optimization strategies, and shows how advanced controls can cut operating costs of distillation.

    Béla Lipták, PE, Control Columnist
    01/11/2006
  • Flow metering gets more fluid

    There are more and more funcationalities being added to your most trusted instrumentation. These established technologies have expand their reach and performance.

    Mike Spear, editor at large
    01/09/2006
  • Pump start-ups

    As the new year starts up for contributor Ross Mackay, he is reminded of a pump start-up condition he encountered in a client's plant.

    Ross Mackay
    01/09/2006
2101-2120 of 2558 < first | | | last >