2021-2040 of 2396 < first | | | last >
  • 2006 Readers' Choice Survey

    The equipment, services and suppliers selected to make a job easier greatly contribute to on-the-job success. The Readers' Choice survey identifies the leading vendors in more than 40 categories.

    Ken Schnepf, managing editor
  • How to select control valves, Part 1

    When it comes to selecting and sizing control valves, the non-commercial chart in this article not only helps you pick the right one for the job, but also serves as a reference tool you can download.

    Béla Lipták, PE, CONTROL Columnist
  • Cutting the wires of communications

    Users want wireless, vendors want to sell wireless, so what’s the problem? This article tackles one of the most discussed topics: the use of wireless communications in process automation.

    Walt Boyes, Editor in Chief
  • Executing Alarm Management

    For you to succeed in advancing your strategy, while keeping the peace, you must meet many challenges — motivating personnel and juggling the integration of changes. The solution is better plant-wide communication and understanding of the alarm philosophy.

    Roy Tanner, and Rob Turner ABB and Jeff Gould, Matrikon
  • Shake up your processing lines

    Vibratory equipment plays a critical role at many plants and there are significant opportunities to upgrade this equipment.

    Linda Mioduszewski, Eriez Magnetics
  • Try before you buy

    There is another side to toll processing. It involves the companies that arguably have the best possible know-how and hardware — for the simple reason that they are the equipment manufacturers themselves, offering toll processing services that utilize their own products.

    Mike Spear, editor at large
  • Can U.S. chemical makers still compete?

    A steady stream of statistics in recent years has pointed to deteriorating competitiveness in the U.S. chemical industry. Domestic producers face global challenges but see opportunities.

    Bill Gerards, contributing editor
  • Pump Performance: Kayo Cavitation

    Checking pump performance curves is one of the first steps in troubleshooting a centrifugal pump problem or seeing if a pump can handle new service conditions. Learn to look for more than just insufficient NPSHA, the common culprit, when investigating cavitation.

    Andrew Sloley, contributing editor
  • Better Design Is No Pipe Dream

    The benefits of using pipeline simulation tools at the piping and instrumentation diagram (P&ID) level, rather than running simulations just on the process flow diagram, can often be overlooked.

    Mike Spear, editor at large
  • Avoid Alarm Blunders

    Ineffective alarm systems pose a serious risk to safety, the environment, and plant profitability. Too often, alarm system effectiveness is unknowingly undermined by poorly-configured alarms. Read about these 12 common mistakes that can undermine the management of your alarm system.

    Michael Marvan
  • Control your maintenance

    Automation systems have now reached such a high degree of reliability that many personnel at plants now take them for granted. Learn to use digital communication with your asset management tools to achieve predictive maintenance and substantial savings.

    Ian Verhappen, MTL Instruments Group
  • Effective Shift Handover Is No Accident

    A successful handover between shifts heavily depends on the organizational skills of management and the effective use of the communication tools available. Learn what these tools are and get the most out of your operators.

    Ian Nimmo, User Centered Design Services, LLC
  • Small sensors promise big impact

    Because many environmental applications of nanotechnology will almost certainly revolutionize the science, law, and regulation of water pollution, readers are urged to keep abreast of this fast-changing area.

    Lynn Bergeson, regulatory editor
  • Pumping Temperature Considerations

    "Bad actor" pumps are those pumps that have trouble with frequent and repetitive failures. In many cases, the source of the problem is an ANSI pump trying valiantly to handle a liquid well beyond the range of its design rating.of 300 degs. F.

    Ross Mackay
  • Level transmitter — art not science

    There is much more to setting up a transmitter than a mere equation. Design and control errors can certainly compromise performance. Follow these simple tricks to get it right.

    Dirk Willard
  • Meet SIS “User Approval” Mandates

    No manufacturer’s claim, third-party analysis or certification report reduces the user’s responsibility for determining that a product is fit for its purpose. Make sure to properly balance analysis and testing information with field experience.

    Angela E. Summers and Susan Wiley, SIS-TECH Solutions, LP
  • Praxair wins 2nd annual Plant Innovation Award

    Chemical Processing's Plant Innovation Award recognizes ordinary engineers for solving difficult technical problems with creativity and dogged determination. Praxair's Geismar plant gains this year's honor for optimizing the performance of reforming units.

    Dirk Willard, senior editor
  • Field Notes: Don't Know Much Geometry

    The cornerstones of chemical engineering are often overlooked. Teaching theory to operators is crucial to safe operations.

    Dirk Willard
2021-2040 of 2396 < first | | | last >