Articles

2001-2020 of 2725 < first | | | last >
  • Seal in long-term savings

    When it comes to minimizing costs, the traditional focus on component or unit cost may be giving way to an alternative approach. Indeed, more and more users are deciding that the long-term benefits of premium-priced elastomeric seal technology outweigh the initial investment.

    Russell Schnell, DuPont Performance Elastomers
    06/07/2007
  • Hardening plants is hard work

    Industry should welcome the new, first-ever federal security rules, advises Editor in Chief Mark Rosenzweig in this month's From the Editor column.

    Mark Rosenzweig, Editor in Chief
    06/06/2007
  • Protect your electronics

    Ignoring exposed electrical boxes can cost you a bundle, says Contributer Dirk Willard, in this month's Field Notes column.

    Dirk Willard, contributer
    06/06/2007
  • Process safety is a good way to avoid bad consequences

    Process safety is an essential component of risk avoidance. The Occupational Safety and Health Administration (OSHA) has long recognized the critically important role for process safety awareness.

    Lynn Bergeson, regulatory editor
    06/06/2007
  • Uncertain safety

    Users seeking appropriate process safety systems aren’t getting enough help from unspecific standards and ideal-world certifications. Here’s how to gain useful safety capabilities in a buyer-beware world.

    06/01/2007
  • What is taking so long?

    Despite its 30-plus-year history, advanced process control (APC) applications remain few and far between, but it doesn’t need to be that way. Dave Harrold, cofounder of the AFAB Group, reports.

    06/01/2007
  • Foundation fieldbus in hazardous areas

    Implementing Foundation fieldbus can seem like a daunting task, and when coupled with hazardous-area considerations, may approach information overload; however, it doesn't have to be an explosive concept.

    06/01/2007
  • Wireless: Ready or not

    A lively discussion of the current role of wireless in online condition monitoring.

    06/01/2007
  • Get ready to comply with new security mandates

    New anti-terrorism standards require the Department of Homeland Security to identify and regulate "high-risk chemical facilities." These facilities will be subject to a security vulnerability assessment. Where does your plant fit in with these new standards?

    David A. Moore and Dorothy Kellogg, AcuTech Consulting Group
    05/29/2007
  • Wireless finds its calling

    For maintenance and condition-monitoring, wireless technology offers much more than just reducing or eliminating costs. However, wireless also requires an integrated infrastructure approach rather than independent, proprietary point solutions.

    05/27/2007
  • Plug it in?: The decision to integrate condition monitoring

    Efforts to tighten communications of condition-monitoring instrumentation and data analysis software with CMMS and automation infrastructure, combined with the proliferation of wireless sensor systems and the drive to reduce manpower skill and time requirements, are bringing implementation costs down and drawing much attention to this approach. But should you implement it?

    05/27/2007
  • What Works: Wireless PCs streamline warehouse operations

    The basic principles of Lean Manufacturing date back at least to the 18th century. In Poor Richard's Almanack, Benjamin Franklin wrote, “He that idly loses 5s. [shillings] worth of time, loses 5s., and might as prudently throw 5s. into the river. He that loses 5s not only loses that sum, but all the other advantages that might be made by turning it in dealing, which, by the time a young man becomes old, amounts to a comfortable bag of money.”

    05/27/2007
  • Build your portfolio

    Is energy efficiency an engineering project or a management process? Contributing Editor Christopher Russell answers that question in this month's Energy Saver column.

    Christopher Russell, contributing editor
    05/16/2007
  • Gamma scanning seeks an inside edge

    Many companies decide not to build up certain capabilities in-house mainly because they don’t have sufficient regular demand for them. Gamma scanning of distillation columns is a case in point, but on-site scanning specialists may be the wave of the future.

    Mike Spear, editor at large
    05/08/2007
  • Properly deliver compressed gases

    From large petrochemical units to tiny pharmaceutical pilot plants, day-to-day operations depend upon providing compressed gases in a controlled, safe and environmentally conscious manner. Correct gas handling also can improve process efficiency.

    Larry Gallagher, CONCOA
    05/08/2007
  • Cut column energy consumption

    With increasing energy prices and public sensitivity to energy consumption, many plants are paying more attention to optimizing distillation. Simple and low-risk operational changes often can provide substantial savings.

    Andrew Sloley, VECO U.S.A.
    05/08/2007
  • Equipment & Services: May

    Chemical Processing's Equipment & Services feature provides a variety of production equipment, supplier services and parts.

    05/08/2007
  • More about cost estimating process analyzer projects

    Gary Nichols concludes his series on the proper design and project management of process analyzer systems, this time addressing estimate accuracy and cost by project stage and work breakdown structure.

    Gary D. Nichols, PE, Principal Control Systems Engineer, Jacobs Engineering Group
    05/01/2007
2001-2020 of 2725 < first | | | last >