Articles

21-40 of 69 < first | | | last >
  • Achieve Model Operations

    Plants can solve a range of problems by leveraging design models

    Rob Hockley and Ron Beck
    06/04/2008
  • Process Hero

    Simulation Software Rocks for Training, but Its Benefits Go Way Beyond Teaching to Aiding Design, Optimization, Maintenance and Life-Cycle Management. Here’s How Savvy Users are Gaining Simulation’s Full Advantages

    04/24/2008
  • Build reliability in during design

    Instrumentation that promises to improve reliability may not always be what they seem. You have to consider whether a site can properly maintain sophisticated instruments.

    Dirk Willard
    12/19/2007
  • Faking It Isn’t All Bad

    Simulate or model your loop tuning, operator training, advanced process control or optimization for savings, safety and skill-building.

    11/16/2007
  • PAT isn’t standing pat

    Traditional laboratory-based analytical techniques more and more are moving online and even being replaced by the virtual analysis offered by soft sensors and inferential measurements.

    Mike Spear, editor at large
    10/30/2007
  • Membrane Boasts Material Benefits

    As economical separation of contaminants from natural gas becomes increasingly important, simulation eases the design of innovative module to remove carbon dioxide. Membranes offer potential advantages over other methods.

    Paul J. Rubas and Kevin R. Geurts, ExxonMobil Upstream Research Co.
    09/11/2007
  • Succeed at Simulation

    The “Seven rules for successful simulation” need to be revisited and revised because of advancements in computers. Simulations that once took weeks to compute an answer now take mere hours.

    Cliff Knight, KnightHawk Engineering
    09/06/2007
  • Flame Modeling Provides Matchless Results

    A computer simulation helps solve a refinery combustion problem. Finding ways to limit NOx from fired heaters, especially under stringent environmental regulations, has become a major concern for the petroleum refining industry. Complying with new stricter regulations, a Texas refinery upgraded the burners in one of its large cylindrical furnaces.

    Roberto Ruiz, Ph.D., John Zink Co.
    04/13/2007
  • Understand and Control Hot Vapor Bypass

    Contributing Editor Andrew Sloley says pressure control technique works well if implemented properly, in this month's Plant InSites column.

    Andrew Sloley, contributing editor
    01/08/2007
  • Process analysis gains greater online role

    Faster. Smaller. Smarter. Modular. All express the future of process analytics. And un-stoppable describes the ongoing migration of process analytical instruments to continuous, online, field-mounted use at chemical plants.

    C. Kenna Amos, contributing editor
    09/11/2006
  • Better Design Is No Pipe Dream

    The benefits of using pipeline simulation tools at the piping and instrumentation diagram (P&ID) level, rather than running simulations just on the process flow diagram, can often be overlooked.

    Mike Spear, editor at large
    07/17/2006
  • Wireless wins wider role

    Wireless is poised for a big breakthrough in plant operations because of its ease of use, safety and potential for energy savings.

    C. Kenna Amos, contributing editor
    03/14/2006
  • Evaluate reactivity with limited resources

    The initial critical steps of reactivity risk reduction need not be expensive, time consuming and require extensive expertise.

    W. J. Rogers, C. Wei and M. S. Mannan, Mary Kay O’Connor Process Safety Center
    11/27/2005
  • Dig Deeper to Find More Capacity

    Pipeline simulation software can uncover hidden causes of capacity bottlenecks.

    Todd J. Willman, EPCON International, Reuben Gates, Shell Chemical LP, and Mark Haboian, Eastman Kodak Co.
    11/09/2005
  • The Synergy of Simulation, Experimentation and Technical Support Activities in a Research Consortium

    For the business of designing process heat exchangers, computational fluid dynamics (CFD) tools are still not practical for everyday use. However, in a research consortium such as HTRI, integrating advanced analysis tools like CFD with industrial-sized experimentation and then applying them to real-world technical problems provides a significant synergistic benefit to the consortium members.

    Kevin J. Farrell
    11/06/2005
  • Your job is still safe... for now

    With mechanical simulation tools, one engineer can do the work of an entire staff. With chemical processes, however, simulation tools aid the staff — but don’t replace it…yet.

    10/25/2005
  • Simulated Moving Bed Chromatography Offers Real Attractions

    A continuous purification technique, simulated moving bed chromatography combines high yields and purities with easy scale up and reasonable throughputs.

    Kathleen Mihlbachler, Eli Lilly and Company, and Olivier Dapremont, Aerojet Fine Chemicals
    08/31/2005
21-40 of 69 < first | | | last >