Articles

1961-1980 of 2753 < first | | | last >
  • Equipment & Services: October

    Chemical Processing's Equipment & Services feature provides a variety of production equipment, supplier services and parts.

    10/01/2007
  • Biofeedstocks see real growth

    Economics as well as increasing corporate emphasis on sustainability and environmentally friendly products are spurring the use of biofeedstocks to make chemicals and fuels.

    C. Kenna Amos, contributing editor
    09/27/2007
  • Exceed environmental expectations

    The chemical industry is making environmental progress but needs stretch goals, says Mark Rosenzweig, in this month's From the Editor column.

    Mark Rosenzweig, Editor in Chief
    09/27/2007
  • EPA assesses link to greenhouse gases

    Steps taken during manufacturing can significantly impact landfill emissions, advises Lynn Bergeson, regulatory editor, in this month's Compliance Advisor column.

    Lynn Bergeson, regulatory editor
    09/27/2007
  • Need a tower internal specialist?

    For over 35 years, the Sulzer Chemtech Field Services group has been a successful tower internals specialty company, performing tray and packing installation, tower maintenance and plant turnaround projects.

    09/17/2007
  • No more turnaround headaches

    After the purchase of Enhanced Separation Technologies, Sulzer Chemtech USA now offers a more complete line of equipment and services for column repairs, maintenance and turnarounds.

    Sulzer Chemtech USA
    09/14/2007
  • Learn about green engineering, processes, bulk-solid handling

    Financially sound green engineering; smooth, safe and secure processes; and efficient bulk-solid handling are the three main areas of focus for the Educational Conference portion of the Chem Show, Tuesday, October 30 through Thursday, November 1, Jacob K. Javits Convention Center, New York, N.Y.

    09/13/2007
  • International firms to debut products at Chem Show

    Innovative products and technologies previously unseen in the United States will be debuted by nearly 50 companies from 15 different countries at the Chem Show, Tuesday, October 30 through Thursday, November 1, at the Jacob K. Javits Convention Center, New York, N.Y.

    09/13/2007
  • Meet the people who provide outsourcing services

    A new Outsourcing Services and Contract Manufacturing Pavilion has been added to the Chem Show, Tuesday, October 30 through Thursday, November 1, at the Jacob K. Javits Convention Center, New York, N.Y.

    09/13/2007
  • Rethink your approach to process safety

    Place more emphasis on avoiding hazards rather than just controlling them. Process risk reduction can involve limiting the likelihood of potential accidents or cutting their consequences.

    Dennis C. Hendershot, Chilworth Technology Inc.
    09/11/2007
  • Membrane Boasts Material Benefits

    As economical separation of contaminants from natural gas becomes increasingly important, simulation eases the design of innovative module to remove carbon dioxide. Membranes offer potential advantages over other methods.

    Paul J. Rubas and Kevin R. Geurts, ExxonMobil Upstream Research Co.
    09/11/2007
  • Wireless proponents take HART

    More chemical plants are expected to go wireless with the introduction of the new wireless protocol for HART devices.

    C. Kenna Amos, contributing editor
    09/06/2007
  • Succeed at Simulation

    The “Seven rules for successful simulation” need to be revisited and revised because of advancements in computers. Simulations that once took weeks to compute an answer now take mere hours.

    Cliff Knight, KnightHawk Engineering
    09/06/2007
  • Get the right cartridge or bag filter

    An inaccurately sized or improperly specified filter can undermine an entire high-performance liquid filtration system. There are a dozen key parameters to assess to determine the proper specification.

    Tim Mills, Kaydon Custom Filtration Corp.
    09/04/2007
  • Avoid blending blunders

    Selecting the correct device is crucial to successfully handling solids. It must deal with discrete pieces that have physical size, electrical properties, frictional differences and surface characteristics that can change with the environment.

    Tom Blackwood, Healthsite Associates
    09/04/2007
1961-1980 of 2753 < first | | | last >