Articles

1941-1960 of 2577 < first | | | last >
  • Best practices in control system migration

    Migration from your old control system to a new one is as an inevitable as death and taxes. But, the key to minimizing the pain is to abide by the control system migration best practices listed here.

    Dan Hebert, PE, Senior Technical Editor
    02/09/2007
  • Debunk plant myths about diagnostics

    Your current control system can probably do more than you think. Everybody can agree that diagnostics are a good thing — they can identify problems early, and keep the plant running at peak performance. Learn how your existing control systems and analog instruments can deliver diagnostic capabilities, at a fraction of the cost of system or instrument replacements.

    George Buckbee, ExperTune, Inc.
    02/08/2007
  • Making the most of diagnostics

    Make the most of your diagnostics with this helpul summary from George Buckbee of ExperTune, Inc.

    George Buckbee, ExperTune, Inc.
    02/08/2007
  • Energy Savings Pick up Steam

    More attention to steam systems and trap monitoring provides big benefits. At most chemical plants, plant management and operators face increasing pressures to improve the energy efficiency of their processes, so they should see how they can save on steam.

    Mike Spear, editor at large
    01/30/2007
  • The chemical industry needs fresh eyes

    Team looking at BP’s safety failings benefited from its diverse membership. Editor Mark Rosenzweig interviews panel member Dennis Hendershot for an insider's perspective.

    Mark Rosenzweig, editor in chief
    01/30/2007
  • 10 tips for diagnosing control valve problems

    To make the most of diagnostic equipment used in chemical processing, technicians must stretch their knowledge of control valves and related diagnostic equipment that keeps tabs on valve health and safety.

    David W. Douglas
    01/22/2007
  • Where is wireless going?

    Increasing interest will translate into far more monitoring applications. The worldwide market for wireless technology will grow 26% annually over the next few years, forecasts the ARC Advisory Group. Vendors are responding and key concerns are being addressed.

    Mike Spear, editor at large
    01/11/2007
  • Find the perfect steam trap

    Consider a variety of factors to select a unit that comes the closest. What steam traps lack in size, they make up for in numbers. In a typical steam plant, their numbers range from several hundred in a large steam plant to more than 20,000 in refinery or chemical complexes.

    Stephen Frank, Richards Industries, Inc.
    01/11/2007
  • Translate lofty financial goals

    A profit-per minute metric can really optimize operations. The chemical industry is discovering that it needs better tools to help capitalize on the products and maximize profits — to generate cash faster. It needs a new metric: profit per minute.

    Richard Batty, Maxager Technology
    01/11/2007
  • Exporters get reporting relief

    EPA eases annual reporting requirements and thresholds, and exporters are feeling relief, according to Lynn Bergeson in her monthly Compliance Advisor column.

    Lynn Bergeson, regulatory editor
    01/08/2007
  • Understand and Control Hot Vapor Bypass

    Contributing Editor Andrew Sloley says pressure control technique works well if implemented properly, in this month's Plant InSites column.

    Andrew Sloley, contributing editor
    01/08/2007
  • Vehicle emissions case promises broad impact

    A Supreme Court ruling could affect voluntary efforts to reduce greenhouse gas emissions, according to Mike Spear, editor at large, in his monthly End Point column.

    Mike Spear, editor at large
    01/08/2007
  • Waylay weight woes

    Production managers, quality control managers and maintenance engineers alike have encountered weigh cells that never worked properly. Why? Why have so many switched from a supposedly high accuracy load cell solution to old fashioned level probes or sight glasses? This article touches on the worst culprits for problems and how to avoid them.

    Ryan Titmas, product manager, Sartorius North America
    01/08/2007
  • pH sensor stands up to tough conditions

    Design provides improved reliability in a polymer-precursor batch reactor. Sensors must respond quickly and survive a harsh environment. Poor probe reliability can make the difference between a process that makes money and one that doesn’t.

    Kyle Becker, Polychemie
    01/08/2007
  • Distillation control and optimization, Part 3

    Control's Béla Lipták continues his series on control of distillation processes, this time focusing on managing reboiler flow, temperature, feed rate, loading and reflux for economy, stability and safety.

    Béla Lipták, PE, CONTROL Columnist
    01/05/2007
  • Know when to leave a sinking ship

    The unspoken truth about projects is that they all come to an end, according to Dirk Willard in this month's Field Notes column. The key, he says, is knowing when to leave.

    Dirk Willard, senior editor
    01/03/2007
  • Chemical industry sees green

    Developments target economics, not just environmental benefits. While pollution prevention was the original goal of green chemistry, today’s efforts promise to have a substantial economic impact.

    Mike Spear, editor at large
    01/03/2007
1941-1960 of 2577 < first | | | last >