Articles

1921-1940 of 2504 < first | | | last >
  • Implementing an operations management system

    Things are changing at warp speed. Manufacturing companies are collecting large volumes of data from data systems but improvements are possible only if the data are analyzed and developed into useful business parameters.

    Robert Wojewodka, The Lubrizol Corp.
    09/29/2006
  • Washington targets plant security

    Federal actions undoubtedly will markedly impact the chemical industry. Nevertheless, we don’t know at this point whether federal chemical security legislation will happen in 2006.

    David A. Moore and Dorothy Kellogg, AcuTech Consulting Group
    09/22/2006
  • Ensure proper silo design

    Designing equipment for solids is not an exact science. The flows of gases and liquids are generally better understood than those of solids. Most production problems arise from flaws in the design. This article presents questions you can ask yourself to ensure reliable flow in your silo.

    Joseph Marinelli, Solids Handling Technologies, Inc.
    09/22/2006
  • Expect tighter particulate matter standards

    Tighter particulate matter standards are in our future, according to Regulatory Editor Lynn Bergeson in this month's Compliance Advisor column on ChemicalProcessing.com

    Lynn Bergeson, regulatory editor
    09/21/2006
  • R&D takes the fast track

    High throughput methods are boosting productivity. A survey of member companies by the American Chemical Council (ACC), Arlington, Va., showed that this year the U.S. chemical industry would be spending around 3% more on research and development than it did in 2005.

    Mike Spear, editor at large
    09/21/2006
  • Intellectual property issues limit university research

    Colleges must slake their thirst for royalties as intellectual property issues limit industry-backed university research, according to Chemical Processing's Editor at Large Mike Spear.

    Mike Spear, editor at large
    09/21/2006
  • Security poses an inherent industry dilemma

    Industry faces the threat of draconian demands from Congress as chemical plants remain an attractive targets for terrorism attacks, according to Mark Rosenzweig, editor in chief of Chemical Processing.

    Mark Rosenzweig, editor in chief
    09/21/2006
  • Column configuration can cripple performance

    The importance of having the inherent capability to meet operating requirements and enable proper instrumentation performance is stressed by Contributing Editor Andrew Sloley.

    Andrew Sloley, contributing editor
    09/21/2006
  • Specifying thermal components systematically

    A common mistake made when specifying a heater or its components is not fully appreciating interactions. Taking a systems approach when specifying thermal components can help.

    Christopher C. Lanham, Watlow
    09/21/2006
  • Choosing the right contract

    A contract can be a stone in your shoe. Knowing which type of contract to choose can make your job easier. Chemical Processing's Senior Editor Dirk Willard provides tips on various types of contracts.

    Dirk Willard, senior editor
    09/20/2006
  • Increase pump performance

    In this web exclusive on ChemicalProcessing.com, pump expert Ross Mackay says a key to a pump's performance is to look at the control system it's running with.

    Ross Mackay
    09/18/2006
  • Boiling water is easy as one, two, three, four

    There’s more to boiler level control than measuring level and adjusting a feedwater valve. Improved measurements and inverse response are just a few of the influences on operating boilers in a reliable manner.

    David W. Spitzer
    09/15/2006
  • NeSSI tames the communications monster

    The new sampling/sensor initiative (NeSSI) is moving steadily to fulfill its original promise of increased efficiencies, costs-savings, and micro-analytic capabilities despite recent growing pains related to fieldbus.

    Jim Montague, Executive Editor
    09/15/2006
  • Sasol plant benefits from reliability improvements

    Sasol Solvents reduced operating costs by more than $2 million dollars at it’s plants in Sasolburg, South Africa. The efforts earned the facility the 2005 HART Plant of the Year Award.

    Dirk Willard, senior editor
    09/14/2006
  • Can technologists make it to the top?

    Having a background in engineering or science means you are more likely to want an executive with the same, according to Chemical Processing's Mike Spear.

    Mike Spear, editor at large
    09/13/2006
  • Heat integration steps can present control problems

    The more energy prices rise, the more heat integration saves. However, heat integration steps can present complex control problems. Slip-ups in putting control systems in place can make operations nearly impossible. That certainly was the case at one unit using heat recovery.

    Andrew Sloley, contributing editor and Carolyn K. Hawley, VECO USA
    09/13/2006
  • Fieldbus improves control system reliability

    Profibus-PA and Foundation Fieldbus both reduce cabling cost by sharing wiring among several field instruments. They also save money by reducing the number of instrument interface cards required to connect field instruments to the control system. However, they all save money by being able to use the same field transmitter for a wide range of measured variables.

    Dick Caro
    09/11/2006
  • Piping for toxic and hazardous gases

    When processes change and plants need to install any of several types of ultra-high-purity process gases, specifying an appropriate piping system is crucial. Learn about a sound system design that maximizes efficiency, purity and safety.

    Jeffrey S. Close
    09/11/2006
1921-1940 of 2504 < first | | | last >