1921-1940 of 2523 < first | | | last >
  • Combat contamination

    Consider the impact of slope, fittings and valves. Plants can lose sizable amounts of money each year because of contamination caused in process lines. Owners and contractors alike can take steps in the design and construction phase to enhance the drainability and cleanability of a system.

    Michael Bridge, Swagelok Company
  • Plant to enterprise – Putting the pieces together

    While improved technology has narrowed the gap, the pressure now is on to complete the plant-floor-to-top-floor link. But the path is a twisty one dogged by complex technical and cultural issues.

    Nancy Bartels, Managing Editor
  • Cost estimating for process analyzer projects

    This article addresses cost estimating for capital projects on which an analyzer system is installed, through start-up and commissioning of the project, to the resultant lifetime cost savings that can be gained.

    Gary D. Nichols, PE, Principal Control Systems Engineer, Jacobs Engineering Group
  • Come together

    Integration of plant-floor, building, physical security, and enterprise network means more changes for unathorized access and more need for intelligent security, cooperation, and training.

    Jim Montague, Executive Editor
  • Equipment & Services: March

    Chemical Processing's Equipment & Services feature provides a variety of production equipment, supplier services and parts.

  • Energy management boosts competitiveness

    Energy Saver columnist Christopher Russell advises that you consider all the motives and rewards for managing plant-wide energy consumption.

    Christopher Russell
  • Don’t let parallel pumps cross you up

    Small differences with parallel pumps can lead to big difficulties, according to Andrew Sloley in this month's Plant InSites column.

    Andrew Sloley, contributing editor
  • Chemical industry starts to shine through clouds

    In its third year, Chemical Processing’s online salary and job satisfaction survey results provides reasons for optimism. The record 1,830 survey respondents’ answers indicate salaries, raises, bonuses and job satisfaction are all moving in a positive direction.

    Ken Schnepf, managing editor
  • Get full value from partial stroking

    There are two main drivers for partial stroking of valves in safety systems: the desire to extend manual test intervals to as long as possible; and to reduce the amount of redundant hardware required for higher safety integrity levels. Like most things in life, it all boils down to one thing: trying to save money.

    Paul Gruhn, ICS Triplex
  • Tips and traps

    Following some partial stroke testing tips can make the process easier. Read on for more tips.

    Paul Gruhn, ICS Triplex
  • Sample pump eliminates emissions

    A compact system significantly improves analyzer accuracy. This innovative turnkey solution for analyzer emissions is a solid-state pump with an ultra-sensitive pressure regulator that mixes a compatible gas with the analyzer samples to achieve a constant vent header pressure — even during times of plant upset.

    Kazi Hassa, Parker Hannifin
  • Compelling reasons to choose an insertion magnetic flow sensor

    Measuring flow rates and volumes of water and chemicals in the water, wastewater and chemical treatment industries requires the latest, simple to use and cost-effective technology that can keep up with the rigorous demands of the various applications.

  • Can you trust your data?

    To make sense of supply chain data requires consolidating the information into a central repository and then using tools or applications to pinpoint errors and inconsistencies. It also includes taking possible corrective actions that enhance overall quality and confidence in the raw information.

    Andrew Nelson, Matrikon Inc.
  • Don’t shackle yourself to the wrong platform

    Today, process data are readily available at many levels, from instrumentation to higher-level data historians and OPC servers. Choosing the right platform can be key to successfully implementing robust and maintainable process calculations at your company.

    Dane Overfield, Exele Information Systems
  • Make your portable mixer work for you

    Understanding the fundamentals of fluid agitation can help meet the customer’s requirement and the processor’s need for efficiency. While portable mixers have been around for years, they often aren’t used to their full potential. Knowing the basics of mixing and flow patterns can help you get more out of your mixer.

    David Dickey, MixTech, Inc. and Lydia Booth Fenley, Illes Seasonings & Flavors
1921-1940 of 2523 < first | | | last >