Articles

1901-1920 of 2503 < first | | | last >
  • Data validation: Jewel in the fieldbus crown?

    Many users and most suppliers to the industry see process availability as the big payout benefit of Foundation Fieldbus (FF) diagnostics — a good portion of it realized through data validation.

    John Rezabek, Contributing Editor
    11/09/2006
  • Consider changing the speed not the pump

    Chemical Processing's Contributing Editor Andrew Sloley advises that instead of reflexively resorting to brute force to provide enough head, adjusting the pump speed might make for a better solution.

    Andrew Sloley, contributing editor
    11/01/2006
  • Avoid trouble with slurries

    Handling slurries (a mix of solids and liquids), should be based on experience and experiments, not theory. Much of the knowledge obtained from pneumatic conveyors and fluidization systems can be used in understanding slurries.

    Thomas R. Blackwood, Healthsite Associates
    11/01/2006
  • Keep measurements on the level

    This article looks at six technologies — mechanical floats and displacers, differential pressure, capacitance, ultrasonic, radar, and guided wave radar — that are used most often for automated control, and provides practical guidance for choosing among them.

    Jerry Boisvert, Siemens Energy & Automation
    11/01/2006
  • Rethink experiment design

    The traditional approach to experimentation, often referred to as the “scientific method,” requires changing only one factor at a time (OFAT), but this method only allows one to see things one dimension at a time. By varying factors only at two levels each, but simultaneously rather than one at a time, experimenters can uncover important interactions.

    Mark J. Anderson and Patrick J. Whitcomb, Stat-Ease
    11/01/2006
  • Wireless devices may get a shake up

    Last month’s ISA Expo in Houston clearly showed how much attention wireless technology is attracting. However, concern about the reliability and life of batteries remains an issue. That’s why harvested or scavenged power is attracting interest.

    Mark Rosenzweig, editor in chief
    10/31/2006
  • Outsourcing innovation development

    A new development method may allow breaking away from the pack as companies continue to employ outsource facilities that offer flexibility and foster innovation.

    Chuck Kenney, Pressure Chemical Company
    10/31/2006
  • Check for human errors

    You may be making an error if you don’t find time to double-check your own and other’s work. Making time to check human work can prevent costly mistakes and save time.

    Trevor A. Kletz, Loughborough University
    10/31/2006
  • Work to build coalitions with difficult teams

    Managing feuds is the first step toward a successful project, according to Senior Editor Dirk Willard in his monthly installment of Chemical Processing's Field Notes column.

    Dirk Willard, senior editor
    10/24/2006
  • Get answers to your biomonitoring questions

    Guidance for chemical manufacturers, processors, and distributors about Section 8(e) of the Toxic Substances control act was issued on September 14, by the U.S. Environmental Protection Agency (EPA). Chemical Processing's Regulatory Editor Lynn Bergeson discusses the new regulation.

    Lynn Bergeson, regulatory editor
    10/24/2006
  • Rise to the challenge of global legislation

    Despite having a parliament that regularly shuttles itself, lock, stock and ballot box, for four days each month between Brussels, Belgium, and Strasbourg, France, the European Union (EU) still manages to put out an amazing amount of legislation.

    Mike Spear, editor at large
    10/24/2006
  • Industry tackles a grave issue

    End-of-life and other product stewardship initiatives will impact chemical plants. An agreement to lessen the environmental impact of chemicals production will have global ramifications. Meanwhile, European end-of-life directives on electrical and electronic equipment already are having a worldwide effect.

    Mike Spear, editor at large
    10/24/2006
  • Choosing motor controls and drives

    In any industrial control application, using the right drives and motor controls can make or break the project, and also can make a huge difference in how well those applications perform.

    10/18/2006
  • How to select control valves, Part 2

    When it comes to selecting and sizing control valves and positioners, this article not only helps you pick the right one for the right job, but also includes a valuable valve selection chart you can download!

    Béla Lipták, PE, CONTROL Columnist
    10/17/2006
  • Welcome to the Bus Wars, Part Tres

    You may not be aware, but a new bus war is being waged in your plant — the battle of the motion networks. Control Global's Senior Tech Editor Dan Hebert, PE, provides analysis and commentary on the newest battle over fieldbus.

    Dan Hebert, PE, Senior Technical Editor
    10/17/2006
  • The FRETT approach to pump problems

    Some U.S. oil refineries repair their centrifugal pumps every three years while other refineries enjoy an average repair interval of 10 years. Learn about the highest-performing refineries and other petrochemical companies that have significantly reduced pump failures, and how you can obtain the same results.

    Heinz P. Bloch, P.E.
    10/16/2006
  • Nominations open for 2007 Plant Innovation Award

    Chemical Processing’s Plant Innovation Award is presented annually to recognize innovative solutions to processing problems at chemical plants throughout the world. Nominate a worthy candidate today.

    10/12/2006
  • Raising the bar for control system security

    Security researchers at Wurldtech Analytics are partnering with ISA to establish procedures and an operations model for the security testing and certification of products used for control.

    Eric and Joann Byres, principals, Wurldtech Analytics
    10/12/2006
1901-1920 of 2503 < first | | | last >