Nanotechnology is grabbing headlines these days and the growing prospects of its use is spurring increasing attention to safety issues. This article examines the worldwide reaction to burgeoning popularity of the technology and what safety concerns are legit.
Residue curve mapping is a powerful tool to better understand the design and operation of distillation columns. This article describes how to use residue curve maps to check the feasibility of separation of homogeneous mixtures and for developing the conceptual design of towers.
No manufacturers claim, third-party analysis or certification report reduces the users responsibility for determining that a product is fit for its purpose. Make sure to properly balance analysis and testing information with field experience.
Author: Angela E. Summers and Susan Wiley, SIS-TECH Solutions, LP
Chemical Processing's Plant Innovation Award recognizes ordinary engineers for solving difficult technical problems with creativity and dogged determination. Praxair's Geismar plant gains this year's honor for optimizing the performance of reforming units.
Chemical processors face significant challenges in controlling fugitive emissions. The emissions escape from valves, compressors, pumps, piping components, etc. It is a difficult task, but necessary to avoid penalties and other liability.
Theres no simple solution to achieving accurate temperature measurement. Its a combination of knowing the inherent accuracy of particular sensor types, and how environmental factors can create further measurement uncertainty and the sensor calibration techniques available to reduce this uncertainty.
Author: Cal Swanson, Watlow Electric Manufacturing Co.
The proper hand protection plays a tremendous role in keeping plant workers safe. This article answers questions often posed by workers and managers about hand protection products, their applications and limitations.
While most mixers can provide a long service life for instance, some are still operating after more than 30 years mechanical problems can shorten life or even break parts. In this article, learn about all the mechanical problems that may befall your mixing equipment.
Changes in liquid densities can throw off readings. Plants commonly rely on differential pressure (DP) cells to measure level. Read this month's Plant InSites for advice on how to solve these level problems.
British Petroleum's tragic March 2005 explosion has been well-documented through the press. Read here to find out how that tragedy spurred the development of a new program addressing management issues at BP.
Author: Foster Finley and Karl Roberts, AlixPartners