Articles

1861-1880 of 2385 < first | | | last >
  • Wireless devices may get a shake up

    Last month’s ISA Expo in Houston clearly showed how much attention wireless technology is attracting. However, concern about the reliability and life of batteries remains an issue. That’s why harvested or scavenged power is attracting interest.

    Mark Rosenzweig, editor in chief
    10/31/2006
  • Outsourcing innovation development

    A new development method may allow breaking away from the pack as companies continue to employ outsource facilities that offer flexibility and foster innovation.

    Chuck Kenney, Pressure Chemical Company
    10/31/2006
  • Check for human errors

    You may be making an error if you don’t find time to double-check your own and other’s work. Making time to check human work can prevent costly mistakes and save time.

    Trevor A. Kletz, Loughborough University
    10/31/2006
  • Work to build coalitions with difficult teams

    Managing feuds is the first step toward a successful project, according to Senior Editor Dirk Willard in his monthly installment of Chemical Processing's Field Notes column.

    Dirk Willard, senior editor
    10/24/2006
  • Get answers to your biomonitoring questions

    Guidance for chemical manufacturers, processors, and distributors about Section 8(e) of the Toxic Substances control act was issued on September 14, by the U.S. Environmental Protection Agency (EPA). Chemical Processing's Regulatory Editor Lynn Bergeson discusses the new regulation.

    Lynn Bergeson, regulatory editor
    10/24/2006
  • Rise to the challenge of global legislation

    Despite having a parliament that regularly shuttles itself, lock, stock and ballot box, for four days each month between Brussels, Belgium, and Strasbourg, France, the European Union (EU) still manages to put out an amazing amount of legislation.

    Mike Spear, editor at large
    10/24/2006
  • Industry tackles a grave issue

    End-of-life and other product stewardship initiatives will impact chemical plants. An agreement to lessen the environmental impact of chemicals production will have global ramifications. Meanwhile, European end-of-life directives on electrical and electronic equipment already are having a worldwide effect.

    Mike Spear, editor at large
    10/24/2006
  • Choosing motor controls and drives

    In any industrial control application, using the right drives and motor controls can make or break the project, and also can make a huge difference in how well those applications perform.

    10/18/2006
  • How to select control valves, Part 2

    When it comes to selecting and sizing control valves and positioners, this article not only helps you pick the right one for the right job, but also includes a valuable valve selection chart you can download!

    Béla Lipták, PE, CONTROL Columnist
    10/17/2006
  • Welcome to the Bus Wars, Part Tres

    You may not be aware, but a new bus war is being waged in your plant — the battle of the motion networks. Control Global's Senior Tech Editor Dan Hebert, PE, provides analysis and commentary on the newest battle over fieldbus.

    Dan Hebert, PE, Senior Technical Editor
    10/17/2006
  • The FRETT approach to pump problems

    Some U.S. oil refineries repair their centrifugal pumps every three years while other refineries enjoy an average repair interval of 10 years. Learn about the highest-performing refineries and other petrochemical companies that have significantly reduced pump failures, and how you can obtain the same results.

    Heinz P. Bloch, P.E.
    10/16/2006
  • Nominations open for 2007 Plant Innovation Award

    Chemical Processing’s Plant Innovation Award is presented annually to recognize innovative solutions to processing problems at chemical plants throughout the world. Nominate a worthy candidate today.

    10/12/2006
  • Raising the bar for control system security

    Security researchers at Wurldtech Analytics are partnering with ISA to establish procedures and an operations model for the security testing and certification of products used for control.

    Eric and Joann Byres, principals, Wurldtech Analytics
    10/12/2006
  • Implementing an operations management system

    Things are changing at warp speed. Manufacturing companies are collecting large volumes of data from data systems but improvements are possible only if the data are analyzed and developed into useful business parameters.

    Robert Wojewodka, The Lubrizol Corp.
    09/29/2006
  • Washington targets plant security

    Federal actions undoubtedly will markedly impact the chemical industry. Nevertheless, we don’t know at this point whether federal chemical security legislation will happen in 2006.

    David A. Moore and Dorothy Kellogg, AcuTech Consulting Group
    09/22/2006
  • Ensure proper silo design

    Designing equipment for solids is not an exact science. The flows of gases and liquids are generally better understood than those of solids. Most production problems arise from flaws in the design. This article presents questions you can ask yourself to ensure reliable flow in your silo.

    Joseph Marinelli, Solids Handling Technologies, Inc.
    09/22/2006
  • Expect tighter particulate matter standards

    Tighter particulate matter standards are in our future, according to Regulatory Editor Lynn Bergeson in this month's Compliance Advisor column on ChemicalProcessing.com

    Lynn Bergeson, regulatory editor
    09/21/2006
  • R&D takes the fast track

    High throughput methods are boosting productivity. A survey of member companies by the American Chemical Council (ACC), Arlington, Va., showed that this year the U.S. chemical industry would be spending around 3% more on research and development than it did in 2005.

    Mike Spear, editor at large
    09/21/2006
1861-1880 of 2385 < first | | | last >