Articles

1801-1820 of 2234 < first | | | last >
  • Choosing the right contract

    A contract can be a stone in your shoe. Knowing which type of contract to choose can make your job easier. Chemical Processing's Senior Editor Dirk Willard provides tips on various types of contracts.

    Dirk Willard, senior editor
    09/20/2006
  • Increase pump performance

    In this web exclusive on ChemicalProcessing.com, pump expert Ross Mackay says a key to a pump's performance is to look at the control system it's running with.

    Ross Mackay
    09/18/2006
  • Boiling water is easy as one, two, three, four

    There’s more to boiler level control than measuring level and adjusting a feedwater valve. Improved measurements and inverse response are just a few of the influences on operating boilers in a reliable manner.

    David W. Spitzer
    09/15/2006
  • NeSSI tames the communications monster

    The new sampling/sensor initiative (NeSSI) is moving steadily to fulfill its original promise of increased efficiencies, costs-savings, and micro-analytic capabilities despite recent growing pains related to fieldbus.

    Jim Montague, Executive Editor
    09/15/2006
  • Sasol plant benefits from reliability improvements

    Sasol Solvents reduced operating costs by more than $2 million dollars at it’s plants in Sasolburg, South Africa. The efforts earned the facility the 2005 HART Plant of the Year Award.

    Dirk Willard, senior editor
    09/14/2006
  • Can technologists make it to the top?

    Having a background in engineering or science means you are more likely to want an executive with the same, according to Chemical Processing's Mike Spear.

    Mike Spear, editor at large
    09/13/2006
  • Heat integration steps can present control problems

    The more energy prices rise, the more heat integration saves. However, heat integration steps can present complex control problems. Slip-ups in putting control systems in place can make operations nearly impossible. That certainly was the case at one unit using heat recovery.

    Andrew Sloley, contributing editor and Carolyn K. Hawley, VECO USA
    09/13/2006
  • Piping for toxic and hazardous gases

    When processes change and plants need to install any of several types of ultra-high-purity process gases, specifying an appropriate piping system is crucial. Learn about a sound system design that maximizes efficiency, purity and safety.

    Jeffrey S. Close
    09/11/2006
  • CAGI to verify compressor claims

    The compressed air industry is taking a step that will clear the air about the performance of its equipment. For the first time, many compressed air equipment manufacturers will submit their 50 hp to 200 hp lubricated rotary-screw compressors and 200 cfm to 1,000 cfm refrigerated air dryers to an independent laboratory for performance testing.

    Ken Byrd
    09/11/2006
  • Implementation fatigue

    The new market realities of higher and rising energy costs as well as global pressures to reduce fossil fuel intensity have made energy management tracking much more valuable. Learn how to keep energy productivity programs from running out of gas in Peter Garforth's latest Energy Expert column.

    Peter Garforth
    09/11/2006
  • The rise and fall of modulation

    Why have reciprocating designs fallen out of favor relative to the rotary compressor that is so predominant today? Read about the evolution of efficient controls for compressed air systems.

    Henry Kemp
    09/11/2006
  • Use leading KPIs to spot trouble

    Does your plant have reliability issues and a hard time meeting production targets? Metrics such as key performance indicators (KPIs), when identified and aligned properly, can save your plant, your job and your career. So grab a pen, open your mind and get ready to learn.

    Ricky Smith, CMRP, Contributing Editor
    09/11/2006
  • Five steps to manage Title V compliance

    Process analytics migrate to online useIf you're responsible for managing Title V at your facility, or you are in the process of securing your Title V permit, you know that the Title V operating program requires that facilities demonstrate, in one document, their compliance. A company needs more than technology to succeed at compliance.

    Greg Gasperecz, Enviance
    09/11/2006
  • Process analysis gains greater online role

    Faster. Smaller. Smarter. Modular. All express the future of process analytics. And un-stoppable describes the ongoing migration of process analytical instruments to continuous, online, field-mounted use at chemical plants.

    C. Kenna Amos, contributing editor
    09/11/2006
  • HMIs evolve in process control

    New HMI technology is putting a whole new (inter)face on how operators view control systems information, while at the same time driving human error out of systems and improving safe work practices.

    Ian Nimmo, president, User Centered Design Services LLC
    09/11/2006
  • Remember the old reliable orifice plate

    The cost-effective dP flow meter is ideal for utility surveys, Senior Editor Dirk Willard says in this month's Chemical Processing Field Notes column.

    Dirk Willard, senior editor
    09/11/2006
  • Innovations in batching, dosing and weighing

    Challenges brought on by new regulations and technical problems for batching, dosing and weighing have pushed users to find some innovative and surprising solutions beyond our own industry.

    09/05/2006
  • The Ch in ChE stands for “Changing”

    Chemical engineers know all about the laws of supply and demand. After all, the chemical industry, which historically has employed the bulk of chemical engineers, is cyclical.

    Mike Spear, editor at large
    08/28/2006
  • Succeed at bioprocess scale-up

    While fermentation-based syntheses were once reserved for producing high-value specialty chemicals and biopharmaceuticals, bioprocess routes now are gaining increasing attention for commodity products.

    John L. Shaw, P.E., and Scott A. Rogers, P.E., CH2MHill Lockwood Greene
    08/28/2006
1801-1820 of 2234 < first | | | last >