Articles

181-200 of 255 < first | | | last >
  • No more turnaround headaches

    After the purchase of Enhanced Separation Technologies, Sulzer Chemtech USA now offers a more complete line of equipment and services for column repairs, maintenance and turnarounds.

    Sulzer Chemtech USA
    09/14/2007
  • Get the right cartridge or bag filter

    An inaccurately sized or improperly specified filter can undermine an entire high-performance liquid filtration system. There are a dozen key parameters to assess to determine the proper specification.

    Tim Mills, Kaydon Custom Filtration Corp.
    09/04/2007
  • Correct those disturbing lapses

    Keeping liquid in a reflux drum still can prevent problems, says Andrew Sloley, in this month's Plant InSites column.

    Andrew Sloley, contributing editor
    08/31/2007
  • Distillation, Part 5: Multiple Products

    In Part 5 of this series on distillation control and optimization, we find that adding a side-stream component to your process gives an additional degree of freedom, but makes it even more essential to not mismatch the variables.

    08/28/2007
  • 10 Tips for Success

    Paying attention to the following points can ease implementing and improving critical plant procedures:

    Patrick Kelly, Honeywell Process Solutions
    08/01/2007
  • Help Your Operators

    Automating procedures within control systems can serve to make your operators more effective and more consistent. With studies showing more than 40% of all plant incidents stemming from some form of human error, it makes sense to give automation a larger role in day-to-day operations.

    Patrick Kelly, Honeywell Process Solutions
    08/01/2007
  • Politics, Appearances and Thinking Green

    The push to “green” energy is good for automation vendors everywhere, but U.S. government rhetoric may put companies on this side of the Atlantic at a competitive disadvantage.

    08/01/2007
  • Uncertain safety

    Users seeking appropriate process safety systems aren’t getting enough help from unspecific standards and ideal-world certifications. Here’s how to gain useful safety capabilities in a buyer-beware world.

    06/01/2007
  • Gamma scanning seeks an inside edge

    Many companies decide not to build up certain capabilities in-house mainly because they don’t have sufficient regular demand for them. Gamma scanning of distillation columns is a case in point, but on-site scanning specialists may be the wave of the future.

    Mike Spear, editor at large
    05/08/2007
  • Properly deliver compressed gases

    From large petrochemical units to tiny pharmaceutical pilot plants, day-to-day operations depend upon providing compressed gases in a controlled, safe and environmentally conscious manner. Correct gas handling also can improve process efficiency.

    Larry Gallagher, CONCOA
    05/08/2007
  • Cut column energy consumption

    With increasing energy prices and public sensitivity to energy consumption, many plants are paying more attention to optimizing distillation. Simple and low-risk operational changes often can provide substantial savings.

    Andrew Sloley, VECO U.S.A.
    05/08/2007
  • The evolution of plant automation

    Understanding the purpose of control and safety systems helps users ensure each is appropriately optimized. The duties of the SIS are to protect the people, environment and assets against unsafe conditions.

    Angela Summers, PhD, PE, founder of SIS-TECH Solutions
    03/03/2007
  • Plants get help in boosting reliability

    More and more companies are placing greater emphasis on maintenance and seeking help from vendors to boost the effectiveness of their efforts, as some recent major investment decisions demonstrate. Many automation companies now are benefiting by building up asset management services alongside process control capabilities.

    Mike Spear, editor at large
    02/26/2007
  • Debunk plant myths about diagnostics

    Your current control system can probably do more than you think. Everybody can agree that diagnostics are a good thing — they can identify problems early, and keep the plant running at peak performance. Learn how your existing control systems and analog instruments can deliver diagnostic capabilities, at a fraction of the cost of system or instrument replacements.

    George Buckbee, ExperTune, Inc.
    02/08/2007
  • Making the most of diagnostics

    Make the most of your diagnostics with this helpul summary from George Buckbee of ExperTune, Inc.

    George Buckbee, ExperTune, Inc.
    02/08/2007
  • Distillation control and optimization, Part 3

    Control's Béla Lipták continues his series on control of distillation processes, this time focusing on managing reboiler flow, temperature, feed rate, loading and reflux for economy, stability and safety.

    Béla Lipták, PE, CONTROL Columnist
    01/05/2007
  • Wal-Mart applies clout

    Wal-Mart Stores, Inc., previously committed to reduce by 5% the packaging used by its 60,000 suppliers by 2013. Now, a new initiative uses a scorecard to tackle wasteful packaging.

    Lynn Bergeson, regulatory editor
    12/05/2006
181-200 of 255 < first | | | last >